Laserfiche WebLink
the Luce line close the tower, and also at our house which would <br />be quite close to the antenna. I was not able to ascertain the <br />antenna pattern, nor the location of the first side lobe to enable <br />me perform these calculations, to determine how much rf power <br />will affect us. It is generally accepted that the currer^ US <br />standard of 3 mW per square centimeter is too high, and an <br />acceptable level should be a factor of 1 0 to 100 times less. <br />The tower should be sited in an industrial zoned area. I am <br />sure that the planned network and radiated power densities may <br />be altered to suit the location of a tower in an industrial zoned <br />setting, it may increase the initial installation costs of the <br />system, and alter the pattern coverage to some degree, but <br />claims to the contrary should not be accepted. I do not believe <br />the tower should be sited in this residential zoned area. <br />I write to you as I have a prior engagement, and thus may <br />not be able to attend the hearing today, and express my views in <br />person. I am a specialist in high frequency engineering, and <br />therefore I am qualified to comment on various technical matters <br />in this area. <br />Yours sincerely <br />Anand Gopinath