Laserfiche WebLink
<br /> <br /> <br />8 _________ <br /> Initial <br /> <br />Super Single Wheels <br />OEM shall be removed the stock Ford Tires / Rims and be supplied “Super Single” <br />conversion kit on the front and rear axle of the apparatus; the tires shall be Founders Off <br />Road 36 x 13.50 – 19.5; the black painted rims shall be 19.5” x 9.75”. <br /> <br />3” Chassis Lifting Kit <br />A 3” lifting kit shall be provided and installed on the Ford chassis truck to match the super <br />single wheels. <br /> <br />Front Fender Flares <br />8” black plastic fender flares shall be installed instead of OEM Ford front fenders. <br />Brand name shall be BuckStop. <br /> <br />Poly Body <br />The poly body shall consist of a left and right sides module with doors. In addition, there <br />shall be a formed metal header panel and threshold panel. These components shall be <br />assembled to form the modular body and shall be supported by a steel sub frame <br />weldment. All components of the body shall be bolted together to allow for easy <br />replacement. Threaded inserts shall be installed into all blind mounting holes. All other <br />fasteners shall be in stainless steel. <br /> <br />Standard Features <br />• Rust and corrosion free body module <br />• Lightweight material allows for increased payload <br />• Compartments constructed with ½” high impact resistant copolymer sheet <br />• Modular construction offers easy replacement or repair of side packs <br /> <br />Material <br />The material used to construct the body side modules and doors shall be extruded <br />copolymer polypropylene. <br /> <br />Materials that deteriorate when exposed to sunlight, extreme weather or operational <br />conditions shall not be used or shall have a means of protection against such conditions <br />that will not prevent compliance with performance standards. Protective coatings that <br />chip, crack, or scale with age or extremes of climatic conditions or by exposure to heat or <br />cold shall not be used <br /> <br />Body & Compartments Mounting <br />All compartments shall be ventilated through an integrated positive pressure vent system <br />allowing for movement of air between compartments. Vent outlet at the front of the side <br />compartment modules shall provide a water-resistant entry and exit for air. <br /> <br />The compartment floors shall be of sweep out design for easy cleaning and have provision <br />for drainage of moisture. <br /> <br />Compartments floors and shelves shall be covered with Plastic Tiles. The tiles shall be <br />black with yellow angled leading edges. <br /> <br />175