Laserfiche WebLink
<br />Page 17 of 21 <br />SECTION 11. Section 78-1431 shall be amended by deleting the strikethrough text and adding <br />the underlined text to read as follows <br />Sec. 78-1431. Accessory buildings and structures on through lots. <br />All accessory buildings and structures on through lots located in R districts shall meet the <br />principal building setbacks that are established for the appropriate district. meet the following <br />requirements: <br />(1) The building or structure shall meet the principal building setbacks that are <br />established under sections 78-230, 78-255, 78-305, 78-330, 78-350, 78-370, 78-395, 78-420, 78- <br />444. <br />(2) No negative impacts to adjacent neighbors or public right-of-way result in the <br />placement of the building or structure, determined at the discretion of the city administrator. <br />Should the city administrator determine that item (2) above cannot be met an accessory <br />structure or building may be permitted by conditional use permit if the planning commission <br />determines no negative impacts result in the placement of the building or structure. The planning <br />commission may apply reasonable conditions as part of the approval. <br />SECTION 12. Section 78-1434 shall be amended by deleting the strikethrough text and adding <br />the underlined text to read as follows <br />Sec. 78-1434. Building size restrictions. <br />No accessory building shall exceed 1,000 square feet of footprint area; except that accessory <br />buildings in excess of 1,000 square feet shall be considered oversized and will be allowed under <br />the following conditions: <br />(1) Not more than one oversized accessory building (OAB) shall be permitted on any <br />property. An OAB is defined as an accessory building of footprint area in excess of <br />1,000 square feet. <br />(2) An OAB is regulated by the following table: <br />Lot Area (acres) Maximum Allowed Cumulative Total of All Accessory <br />Building Footprint Areas on a Property (square feet) <br />0—1.99 2,000 <br />2.00—3.00 2,400 <br />3.01—3.50 2,800 <br />3.51—4.00 3,200 <br />4.01—4.50 3,600 <br />4.51—5.00 4,000 <br />5.01—6.00 4,400 <br />6.01—7.00 4,800 <br />7.01—8.00 5,200 <br />8.01—9.00 5,600 <br />9.01—10.00 6,000 <br />10.01—11.00 6,400 <br />103