Ord #032-3rd Ser/Repealing/amending code re: Industrial Uses

Home Browse Search

provided where a business or industry is directly across the street from a residential zone. B. Fencing. All fences shall be placed within the property being fenced. (1) Fences extending across a required front yaxd or required side yard which abut a street on a corner lot shall be at least seventy-five (75) percent open for a passage of air and light and shall maintain the traffic visibility. (2) Industrial fences shall not exceed eight(8) feet in height. C. Minimum Number of Plantings. Industrial Districts shall contain, at a minimum the greater of two (2) trees per one thousand (1,000) square feet of gross floor area or two (2) trees per forty (40) lineal feet of site perimeter whichever is greater. D. Minimum planting size. All landscaping incorporated in said plan shall conform to the following standaxds and criteria. All plants must at least equal the following minimum size: (All trees shall be balled and burlapped (B&B) and shrubs shall be container grown unless otherwise approved by City Staff. Type and mode of planting are dependent upon time of planting season, availability, and site conditions(soils, climate, ground water, irrigation, grading, etc.). Shade Trees 1.5 to 2 inch Ornamental Trees 1 inch Coniferous Trees 4-6 feet Large Deciduous Tree 2-4 feet Large Coniferous Shrubs 2-4 feet Small Deciduous Shrubs 18-24 inches Small Coniferous Shrubs 18-24 inches E. Spacing: (1) Plant material centers shall not be located closer than three (3) feet from the property line and shall not be planted to conflict with public plantings based on the judgment of the Zoning Administrator. (2) Where plant materials are planted in two (2) or more rows, plantings shall be staggered in rows unless otherwise approved by the Zoning Administrator. (3) Where plants or screening is intended, large deciduous and coniferous shrubs shall not be planted more than four(4) feet on center. 15