Laserfiche WebLink
M ■AUTOCAD DXTABASK FII.E nFr.TVRRVThis data base file deliverv’ is based on the following parameters:1 The data provided will operate on IBM Compatible hardware or equivalent. <br />2. The Disk Operating System will be MS DOS V 3 3 <br />3. The media for data transfer will be either 5 1/4” 1.2 floppy disk or 3 1/2” 1.5 MB <br />micro disk <br />4. The data will operate within Al iTOC AD RFLEASF 11 software. <br />5 Grid Ticks will be contained in the data file. <br />6. Siniple title blocks will be shown if requested (to include legend project and client <br />name, map scale, contour interval and north arrow (please specify any special title block <br />format needs) <br />7 Symbols will be represented as Blocks in the data file <br />8 Polylines are standard with .AUTOCAD R-11 <br />9. The overlap or edge match of the data files on a mbultiple sheet delivery project will <br />duplicate the hard copy sheets delivered (please specify exceptions prior to project start) <br />Any non-standard data base file delivery other than the above standard delivery can be <br />provided at the discretion and approval of Horizons, Inc. prior to project beginning at an <br />additional agreed upon cost <br />MAP USAGK. AmmAO^ & uabiuty <br />Except where *he ground may be obscured, map accuracy will comply with National Map <br />Accuracy Standards Briefly, these state that 90% of all well defined features shall be <br />correct within 1/30 inch and 90% of elevations correct within 1/2 contour interval It <br />areas are obscured, contours will be dashed to indicate they are .ippro> jmale Spot <br />elevations, if any, within these obscured areas will also b: approximate. This map and/or <br />database has been designed to meet National Map Accuracy Standards at its original scale <br />of 1" = 100' and contour interval of 2V