08-17-1987 Planning Packet - Laserfiche WebLink

Home Browse Search

BUILDING PERMIT APPLICATION PROCEDURE Each application for a building permit shall bo accompanied by the data indicated below. Failure to submit complete information will result in return of applications. Please read carefully the listed requirements. 1. ALL APPLICATIONS A. Completed application forms including all information required in the numbered spaces, dated and signed by applicant. Two copies of building plans, drawn to scale, together with specifications containing the following minimum information; (requirement for building plans may be waived by the Building Official for small structures or minor work). Where manufacturer or dealer requires the return of one approved set of plans, four copies will be necessary. 1. Certified____Survey - (required for every application) Legal description of property, dimensions of property, location of existing and proposed structures on site, location of all proposed improvements such as driveways, retaining walls, decks, sidewalks, etc. 2. Grading and Drainage__P1.2.11S ~ where any changes in grade or drainage are proposed as a result of the construction, a grading and drainage plan must be submitted showing existing and proposed contours or grades. Required for ^1. projects. 3. £1221 __£l£H£ ” each floor or level including basement or foundation, decks, porches, garage or carport. Size, spacing, and direction of floor and ceiling framing members, girders, beams, columns and piers. Location and size of all windows and doors including manufacturers identification and documentation of window and door infiltration test data. Iiocation and size of ail permanently installed cabinets, plumbing fixtures, heating, ventilation and air conditioning equipment. 4. Exterior Elevations - All sides of building showing windows, doors, finished grades, exterior finish, depth of footings, foundation v/alls, piers and finished floor elevations. 5. Details__and Sections - a minimum of one section detail through exterior wall for each type of construction proposed, showing materials and dimensions of each member from footing to the highest point of the roof. Details including calculations and stress diagrams together with manufacturers specifications are required for all trusses. Fireplaces, if proposed, must be detailed in plan and cross section. Details and calculations are required for each critical construction detail including beams, overhanging or cantilevered joists, stairways, balconies, or other unique structural features. Information and calculations pertaining to thermal transmittance values and resistance values of each proposed material are required and may be shown either on plans or in specifications (see detailed energy requirement sheet for complete listing of information).