Laserfiche WebLink
3.Dimensional standards for front lots. A front lot created as part <br />of a front/back lot division shall meet all zoning district area, <br />width and setback standards, except that the required side yard of <br />the front lot adjacent to the access outlet shall be equivalent to the <br />side street yard requirement for that zoning district. <br />4. Access requirements: <br />a.Access outlets shall be 30’ minimum width, and shall be <br />wide enough to accommodate drainage, snow removal and <br />screening without encroaching on neighboring properties. <br />b.In approving front/back lot divisions, the City may require <br />that both front lot and back lot. share a driveway access <br />within the access outlet if Council determines that creating <br />an additional access to the existing street will be a potential <br />safety hazard. <br />c.Driveways within a back lot shall be located at least 10 <br />from the side or rear lot lines of adjacent lots. <br />d.No more than two residences may be served by a driveway <br />located within an access outlet. <br />e.No access outlet may be platted abutting an adjacent outlet <br />except when the intent is to combine the two acce^ outlets <br />for creation of a public or private r.ad meeting City <br />standards. <br />5. Screening requirements and accessory struemre stancto^. <br />Front/back lot subdivisions shall be designed in a manner such that <br />the screening requirements and accessory structure standards of <br />Section 10.03, Subdivision 27 can be met. <br />6. The requirements and standards of this section shall apply only to <br />those front/back lot divisions which receive preliminary plat <br />approval after January 1, 1994.