Laserfiche WebLink
Item 19 - Tanker Midwest 2000 gallon 4.3.23, Spec, 3313S <br />Save Date: 8/25/2023 8:48 AM Customer Initials ______ <br />Print Date: 8/25/2023 8:48 AM 19 Rev P <br />11.06 Rear Chevron <br />11.06.05 Diamond Grade Pattern, Chevron 100% <br />Per NFPA 1901 standards, 100 percent of the rear will include red and fluorescent yellow <br />diamond grade pattern chevron retro-reflective stripe installed, with each stripe a minimum of <br />6” wide. <br />SECTION 12: CORROSION PROTECTION AND MUD FLAPS <br />12.00 Corrosion Protection <br />The All-Poly Series body has several features which prevent corrosion. <br />• All fasteners are stainless-steel where applicable. <br />• All contacts of dissimilar metals are insulated with 3M products to prevent galvanic corrosion. <br />• Rub rails are Type II bright dip anodized. <br />• Tow rings are powder coated steel. <br />• The Poly body material eliminates the need for undercoating and sprayed on coating inside <br />storage lockers. <br />• The Poly body material is non-corrosive and is frequently used for storing acids. <br />• The Poly body material eliminates many possibilities of dissimilar metal contact caused by <br />galvanic reaction. <br />12.01 Mud Flaps <br />There are two mud flaps installed behind the rear wheels. <br />• The mud flaps are ¼ inch thick black rubber. <br />• The bottom of the mudflaps are fitted with chrome weights. <br />SECTION 13: PUMP AND PLUMBING <br />13.00 Pump House <br />• Side Control Pump House <br />The pump compartment features: <br />• The superstructure frame is made from .125” wall X 2.00” square type aluminum tubing. <br />• The front and a portion of the rear of the pump compartment is made from aluminum tread <br />plate sheets to enclose the perimeter of the water pump. <br />• There will be two (2) horizontal grab rails provided, one on each side, above the pump control <br />panels. <br />• The street and curb sides of the pump compartment are equipped with side running boards. <br />The running boards extend along the width of the pump compartment from the rear of the <br />chassis cab to the forward end of the body module. <br />• Pump side panels are covered with black protective material. <br />• Running boards include extruded aluminum rub rail extending the length of the running boards. <br />• The step surfaces comply to applicable sections of NFPA 1901 requirements.