08-28-2023 Council Packet - Laserfiche WebLink

Home Browse Search

Item 19 - Tanker Midwest 2000 gallon 4.3.23, Spec, 3313S Save Date: 8/25/2023 8:48 AM Customer Initials ______ Print Date: 8/25/2023 8:48 AM 12 Rev P • Each compartment will have an anodized aluminum roll-up door, door activated LED compartment lights, corrosion resistant vents, black Turtle Tile plastic dry decking, and floor drains. • Compartments at wheel height or below (located ahead or behind rear wheels) are 25” deep. • Full height compartments have stepped depth: 12” above the wheel wells and 25” at wheel height or below. • Compartments located above the wheel wells are 12” deep. 6.00.01 Street Side Front Low Compartment Compartment is located on the street side, ahead of the rear wheels. Approximate inside dimensions are 70” wide by 32” tall by 25” deep. (60” Roll-up door) 6.01 Curb Side Compartments • A sweep-out style compartment provided on the curb side, integral to the body, constructed using white copolymer material. • Each compartment will have an anodized aluminum roll-up door, door activated LED compartment lights, corrosion resistant vents, black Turtle Tile plastic dry decking, and floor drains. • Compartments at wheel height or below (located ahead or behind rear wheels) are 25” deep. • Full height compartments have stepped depth: 12” above the wheel wells and 25” at wheel height or below. • Compartments located above the wheel wells are 12” deep. 6.01.01 Curb Side Front Low Compartment Compartment is located on the curb side, ahead of the rear wheels. Approximate inside dimensions are 62” wide by 32” tall by 25” deep. (60” Roll-up door) SECTION 7: RUNNING BOARDS, CATWALKS, AND REAR STEP 7.00 Running Boards A 12” wide running board is located at the base of the pump house and is made from embossed aluminum tread plate and includes a replaceable extruded aluminum rub rail. 7.01 Catwalks Catwalks are located above the street and curb side compartments, made of embossed aluminum tread plate, and bent at a 30-degree angle to provide a drip rail. 7.02 Rear Step The rear step is NFPA compliant non-slip and made of embossed aluminum tread plate with a 7" tall kick plate. Rounded polished aluminum castings installed on the corners of the step.