08-28-2023 Council Packet - Laserfiche WebLink

Home Browse Search

Item 19 - Tanker Midwest 2000 gallon 4.3.23, Spec, 3313S Save Date: 8/25/2023 8:48 AM Customer Initials ______ Print Date: 8/25/2023 8:48 AM 10 Rev P 3.00.03 Street side rear dump valve with 36” telescoping chute. 3.00.04 Curb side rear dump valve with 36” telescoping chute. SECTION 4: PORTABLE TANK CARRIER 4.00 Manual Tip-down Portable Tank Carrier One (1) manual tip-down portable tank carrier for loading/unloading of a folding water tank located above the catwalk and designed to fold down over the body side. When in the up position the tank, carrier will be secured with heavy duty locking DeStaco latches. The tank carrier is constructed of 1 1/4" 14-gauge stainless-steel square tubing. A red “Carrier down" flashing LED warning light visible to the driver will illuminate when the portable tank carrier is not in the stowed position. 4.00.04 2100 gallons, curb side 4.01 Manual Carrier Enclosure Option Portable tank carrier enclosure is enclosed on three sides and is equipped with two grab rails, except for the wind deflector. If equipped, the wind deflector option is installed on the tank carrier towards the front, and only has one grab rail. 4.01.01 Portable Tank Carrier with front aluminum Tread-brite wind deflector. 4.06 Portable Tank The portable tank frame will be constructed with the requested material below. The tank liner is constructed of nylon -coated material, 23 oz. side walls and a 30 oz. floor with handles installed in the floor for ease of folding. All portable tanks will have two outlets. 4.06.04 2100 Gallons, Aluminum Frame, Red, 135”x 29” SECTION 5: BODY AND COMPONENTS Body • The body will be enclosed on all sides and incorporate closed wheel wells and finished storage compartments. • Stainless-steel corner guards to protect from damage on road and fire scene. • Front lower vertical surface of body protected with aluminum Tread-brite. Tank • The tank is affixed to the cradle utilizing hat channel mounting brackets constructed of ¼” thick stainless-steel. The channels are mounted beneath the center of the tank before and after the cross members of the cradle. The channel is surrounding these members and is bolted directly to the bottom of the tank thereby securing the tank to the cradle. • This mounting system provides a free-floating connection of the tank to the cradle which allows the chassis frame’s normal movement and twist to introduce no stress upon the tank or body. Fenders