Laserfiche WebLink
exfHirr <br />Proposed amended Architectural requirements to replace 10.45 Subd. 6(J): <br />I.Architectural Standards. <br />1. <br />2. <br />3. <br />4. <br />5. <br />It is not the intent of the City to restrict design freedom unduly when <br />reviewing project architecture in connection with a site and building <br />plan. However, it is in the best interest of the City to promote high <br />standards of architectural design and compatibility with surrounding <br />structures and neighborhoods. Architectural plans shall be prepared <br />by an architect or other qualified persons acceptable to the Cit>* and <br />shall show the following for all structures in the B-6 District: <br />a) <br />b) <br />c) <br />d) <br />elevations of all sides of the building; <br />type and color of exterior building materials; <br />a typical floor plan; <br />dimensions of all structures; <br />the location of trash and recycling containers and of heating, <br />ventilation and air conditioning equipment. <br />Unadorned prestressed concrete panels, concrete block and unfinished <br />metal shall not be permitted as exterior materials for principal and <br />accessory buildings. This restriction shall apply to all principal <br />structures and to all accessory buildings except those not visible from <br />any exterior property line. The city may, at its discretion, allow <br />architecturally enhanced block or concrete panels. <br />Accessory buildings shall be architecturally compatible with principal <br />structures. <br />All rooftop or ground mounted mechanical equipment and exterior <br />trash and recycling storage areas shall be enclosed with materials <br />compatible with the principal structure. Low-profile, self contained <br />mechanical units which blend in with the building architecture are <br />exempt from the screening requirement. <br />Underground utilities shall be provided for all new and substantially <br />renovated structures. <br />p <br />4