Development contract - Laserfiche WebLink

Home Browse Search

identification signs. The sign shall comply with setbacks and shall be located outside the sight visibility tria.ngle in compliance with City sign ordinance requirements. F. All lots have been tested and found capable of providing suitable primary and alternate sites for on-site sewage treatment systems. For all lots, mound systems will be required. Special precautions, including but not limited to protective covenants as well as physical barriers during construction activity, must be taken to protect these sites on both a short-tertn and long-term basis, as municipal sewers are not projected to be extended to serve the Land. Before the City signs the Plat, the Developer shall furnish an appropriately executed Declaration of Restrictive Covenant for Protection of Sewage Treatment Sites, in recordable form. G. All of the proposed lots must contain suitable area meeting all established setback requirements to allow the construction of single family residences. H. The Developer must obtain a sign permit from the City Building Official prior to installation of any subdivision identification signs for the Land. The City sign ordinance allows temporary subdivision identification signs on corner lots provided the signs meet area, height, and setback requirements, and provided the Developer submits a $1,000.00 per sign security guaranteeing sign removal when the subdivision is fully developed. I. Prior to City Council approval of the final Plat, the Developer shall furnish a boundary survey of the Land with all property corner monumentation of the Land in place and marked with lath and a flag. Any encroachments on or adjacent to the Land shall be noted on the survey. The Developer shall post a $500.00 security (the "Monuxnent Security") for the fmal placement of interior subdivision iron monuments at property corners and the placement of all monuments pursuant to 1066. The Monument Security was calculated as follows: five (5) lots at 11 169371v5