Boat Club Issues 2010-2011 - Laserfiche WebLink

Home Browse Search

MOTOR FUEL-DISPENSING FACILITIES AND REPAIR GARAGES TABLE 2209.5.4.3.6(1) MAXIMUM RADIANT HEAT EXPOSURE t' EXPOSED OBJECT MAXIMUM RADIANT HEAT TIME DURATION(minutes) Personnel 1,500 Btu/hrft2(4732 W/m2) 3 Noncombustible e'uiment 8,000 Btu/hrft2(25 237 W/m2) Any Lot line 500 Btu/hrft2(1577 W/m2) Any TABLE 2209.5.4.3.6(2) MAXIMUM HYDROGEN CONCENTRATION EXPOSURE EXPOSED OBJECT MAXIMUM HYDROGEN CONCENTRATION Personnel,buildings or equipment 50%LFL within a distance of D and H of Table 2209.5.4.3.4 Lot line 50%LFL within 1.25 times the distance of D and H of Table 2209.5.4.3.4 2210.2.1 Class I,II or IIIA liquid storage. Class I, II or 2210.3.5 Liquefied petroleum gas. Liquefied petroleum IIIA liquids stored inside of buildings used for marine motor gas cylinders shall not be filled at marine motor fuel-dis- fuel-dispensing facilities shall be stored in approved con- pensing facilities unless approved.Approved storage facili- tainers or portable tanks.Storage of Class I liquids shall not ties for LP-gas cylinders shall be provided.See also Section exceed 10 gallons(38 L). 2207. Exception: Storage in liquid storage rooms in accor- 2210.4 Fueling of marine vehicles at other than approved dance with Section 3404.3.7. marine motor fuel-dispensing facilities.Fueling of floating 2210.2.2 Class H or IIIA liquid storage and dispensing. marine craft with Class I fuels at other than a marine motor Class II or IIIA liquids stored or dispensed inside of build- fuel-dispensing facility is prohibited. Fueling of floating ings used for marine motor fuel-dispensing facilities shall marine craft with Class II or III fuels at other than a marine be stored in and dispensed from approved containers or por- motor fuel-dispensing facility shall be in accordance with all of table tanks. Storage of Class II and IIIA liquids shall not the following: exceed 120 gallons(454 L). 1. The premises and operations shall be approved by the 2210.2.3 Heating equipment.Heating equipment installed fire code official. in Class I,II or IIIA liquid storage or dispensing areas shall 2. Tank vehicles and fueling operations shall comply with comply with Section 2201.6. Section 3406.6. 2210.3 Dispensing.The dispensing of liquid fuels at marine 3. The dispensing nozzle shall be of the listed auto- motor fuel-dispensing facilities shall comply with Sections matic-closing type without a latch-open device. 2210.3.1 through 2210.3.5. 4. Nighttime deliveries shall only be made in lighted areas. 2210.3.1 General.Wharves,piers or floats at marine motor 5. The tank vehicle flasher lights shall be in operation while fuel-dispensing facilities shall be used exclusively for the dispensing or transfer of petroleum products to or from dispensing. marine craft,except that transfer of essential ship stores is 6. Fuel expansion space shall be left in each fuel tank to pre- allowed. vent overflow in the event of temperature increase. 2210.3.2 Supervision.Marine motor fuel-dispensing facil- 2210.5 Fire prevention regulations.General fire safety regu- ities shall have an attendant or supervisor who is fully aware lations for marine motor fuel-dispensing facilities shall comply of the operation,mechanics and hazards inherent to fueling with Sections 2210.5.1 through 2210.5.7. of boats on duty whenever the facility is open for business. 2210.5.1 Housekeeping. Marine motor fuel-dispensing The attendant's primary function shall be to supervise, facilities shall be maintained in a neat and orderly manner. observe and control the dispensing of Class I,II or IIIA liq- Accumulations of rubbish or waste oils in excessive uids or flammable gases. amounts shall be prohibited. 2210.3.3 Hoses and nozzles. Dispensing of Class I, II or IIIA liquids into the fuel tanks of marine craft shall be by 2210.5.2 Spills.Spills of Class I,II or IIIA liquids at or on means of an approved-type hose equipped with a listed the water shall be reported immediately to the fire depart- automatic-closing nozzle without a latch-open device. ment and jurisdictional authorities. Hoses used for dispensing or transferring Class I, II or 2210.5.3 Rubbish containers. Metal containers with IIIA liquids,when not in use,shall be reeled,racked or oth- tight-fitting or self-closing metal lids shall be provided for erwise protected from mechanical damage. the temporary storage of combustible trash or rubbish. 2210.3.4 Portable containers. Class I, II or IIIA liquids 2210.5.4 Marine vessels and craft. Vessels or craft shall shall not be dispensed into a portable container unless such not be made fast to fuel docks serving other vessels or craft container is approved. occupying a berth at a marine motor fuel-dispensing facility. 210 2006 INTERNATIONAL FIRE CODE®