Laserfiche WebLink
3. Bluff impact zones. Structures. ' alrid <br /> accessory facilities, except stairways, landings, and lock boxes, <br /> oust not be placed within bluff impact zones. <br /> G. Steep Slopes. Any applicant requesting a <br /> permit for co^truction of sewage treatment systems, roads, <br /> driveways, structures, or other improvements on steep slopes, shall . <br /> provide adequate information to allow the City to evaluate possible <br /> soil erosion impacts and development of visibility from public <br /> waters before such permit may be issued. When determined <br /> necessary, conditions shall be attached to issued permits to <br /> prevent erosion and preserve existing vegetation screening of <br /> structures, vehicles, and other facilities as viewed from the <br /> surface of public waters, assuming summer, leaf-on vegetation. <br /> f F rfn� <br /> I. Vegetation Alterations. acid Awa b\V,'1�CS <br /> MEM <br /> 2. Intensive vegetati n clearing within 75 <br /> feet of the shoreline and on steep slopes within the Shoreland <br /> Overlay District is prohibited. Limited clearing of shrubs and <br /> trees less than 6 inches in diameter and cutting; pruning and <br /> trimming of trees of any size is allowed to provide a view to the <br /> water from the principal dwelling site and to accomodate the <br /> placement of permitted stairways and landings, picnic areas, access <br /> paths, beach and watercraft access areas, and permitted lock boxes, <br /> provided that the screening of structures, vehicles or other <br /> facilities as viewed from the water, assuming summer, leaf-on <br /> conditions, is not substantially reduced. <br /> J. Topographic Alterations/Grading and Filling. <br /> 5 . The following considerations and <br /> conditions must be adhered to during the issuance of construction <br /> permits, grading and filling permits, conditional use permits, <br /> variances and subdivision approvals: <br /> g. Plans to place fill or excavated <br /> material on steep slopes must be reviewed by the City Engineer for <br /> continued slope stability and must not create finished slopes of <br /> 30% or greater; <br /> h. Fill or excavated material must not <br /> be placed in bluff impact zones; <br />