02-16-2021 Planning Commission Packet

Home Browse Search

adjacent property lines a horizontal distance no less than the maximum height of the antenna. 5. Building permits. A building permit shall be required for the installation of any accessory antenna requiring a conditional use permit. Building permit applications shall be accompanied by a site plan and structural component data for the accessory antenna, including details of anchoring. The building official must approve the plans before installation. 6. Lighting protection. Each accessory antenna shall be grounded to protect against natural lightning strikes in conformance with the National Electrical Code as adopted by the city. 7. Electrical code. Accessory antenna electrical equipment and connections shall be designed and installed in conformance with the National Electrical Code as adopted by the city. 8. Color/content. Accessory antennas shall be of a neutral color and shall not be used as signage. b. Amateur shortwave radio antennas and towers. Amateur shortwave radio antennas and fowlers which do not meet the conditions for accessory antennas, may be allowed with a conditional use permit in all zoning districts provided they meet the following conditions: 1. Height. When an amateur shortwave radio antenna is mounted on an antenna tower, the total height of the antenna and tower shall not exceed 65 feet. 2. Yards. Amateur shortwave radio antennas and towers shall not be located within a front, corner side or side yard. 3. Setbacks. Amateur shortwave radio antennas and towers shall not be located within any required setback area and shall be located no less than the height of the antenna and tower from the property line. (9) Other uses that are customarily incidental to, and subordinate to, the allowed permitted and conditional uses in this district. (Code 1984, § 10.40(5); Ord.No. 161 2nd series, § 8, 6-7-1997; Ord.No. 183 2nd series, § 3, 2- 22-1999; Ord. No. 106 3rd series, § 13, 6-10-2013) Sec. 78-646. -Area, height, lot width,setback requirements and design requirements. (a) Area. In any B-1 district, the minimum lot size shall be 20,000 square feet. (b) Lot width. The minimum lot width shall be 100 feet. (c) Front yards. The minimum front yard shall be 20 feet. (d) Rear yards. The minimum rear yard shall be 30 feet, a side yard adjacent to any R district shall be 15 feet, and a side yard adjacent to a street shall be ten feet. (e) Setback requirements. No building shall be nearer than 35 feet to any front lot line, 35 feet from any rear lot line, 15 feet from any side lot line, or 35 feet to a side lot line adjacent to a street; except abutting or across the street from an R district, no building shall be less than 35 feet from such lot line. (f) Fencing. Wherever a B-1 retail sales business district abuts an R district, along the side or rear lot line, a fence or compact evergreen hedge no less than 50 percent opaque nor less than six feet in height shall be erected along the abutting lines except within the required front yard.