|
NEN GON5TRUGTION GENERA!.. NOTE5•
<br />1. SHARRATT DESIGN (5, COMPANY (SDRC) MAKES NO WARRANTY AS TO
<br />THE EXACT CONDITIONS TO BE ENCOUNTERED ONSITE. THESE
<br />DRAWINGS ARE PROVIDED TO DELINEATE THE DESIGN INTENT ONLY. IT IS
<br />THE RESPONSIBILITY OF THE CONTRACTOR AND SUB -CONTRACTORS TO
<br />PERFORM FIELD INVESTIGATION BEFORE UNDERTAKING ANY DEMOLITION
<br />OR RECONSTRUCTION ACTIVITY.
<br />2. THE DEMOLITION NOTES AS SHOWN IN THESE DRAWINGS GENERALLY
<br />OUTLINE VARIOUS ITEMS OF DEMOLITION WORK. IT IS NOT TO BE
<br />CONSTRUED AS ALL INCLUSIVE OF ALL CUTTING, DEMOLITION OF
<br />FINISHES, POSSIBLE ASBESTOS ABATEMENT, WELL CAPPING, ETC..
<br />3. GENERAL CONTRACTOR IS RESPONSIBLE FOR PROVIDING ANY
<br />ADDITIONAL DETAILS REQUIRED FOR CONSTRUCTION. SHARRATT DESIGN
<br />�_ COMPANY RECOMMENDS STRUCTURAL ENGINEERING ON ALL
<br />PROJECTS, IF NO ENGINEERING IS PROVIDED, GENERAL CONTRACTOR TO
<br />INCLUDE ALLOWANCE FOR STRUCTURAL ENGINEERING IN BID, AND TO
<br />COORDINATE ENGINEERING WITH THERMAL, MOISTURE, AND BULK WATER
<br />ENVELOPES, OR TO WORK WITH SDRC TO COORDINATE ONCE
<br />ENGINEERING IS RECEIVED.
<br />4. WARRANTIES SHALL BE IN ACCORDANCE WITH STATE MINIMUM
<br />STANDARDS OR GREATER, REGISTERED BUILDER PROGRAMS AND/OR
<br />PRODUCT WARRANTIES. LIABILITY AND WORKER'S COMPENSATION
<br />CERTIFICATE OF INSURANCE WILL BE REQUIRED FROM ALL
<br />SUBCONTRACTORS.
<br />5. G.G. AND ALL SUB -CONTRACTORS SHALL COMPLETELY FAMILIARIZE
<br />THEMSELVES WITH EXISTING CONDITIONS BY VISITING THE SITE PRIOR TO
<br />SUBMITTING THEIR PROPOSALS. GENERAL CONTRACTOR AND ALL
<br />SUBCONTRACTORS TO VERIFY AND COORDINATE ALL CONDITIONS AND
<br />DIMENSIONS PRIOR TO WORK THROUGH THE ENTIRE BUILDING PROCESS.
<br />G.G. TO CONTACT GOPHER ONE TO VERIFY LOCATIONS OF ALL
<br />UNDERGROUND ELECTRICAL, UTILITIES, SEWER, GABLE, GAS, ETC. PRIOR-
<br />TO
<br />RIORTO COMMENCING WORK. IMMEDIATELY REPORT AND/OR REVIEW ALL
<br />QUESTIONS, DISCREPANCIES AND CONDITIONS WITH THE
<br />OWNER/ARCHITECT PRIOR TO PROCEEDING WITH WORK.
<br />�o. ALL CONSTRUCTION AND/OR MATERIALS AS INDICATED SHALL BE AT
<br />OR ABOVE INDUSTRY STANDARDS FOR SIMILAR CUSTOM RESIDENTIAL
<br />CONSTRUCTION.
<br />7. ALL CONSTRUCTION WORK SHALL CONFORM TO ALL APPLICABLE
<br />CODES.
<br />8. ALL SURVEY DATA, SOIL DATA, MECHANICAL, ELECTRICAL, AND
<br />STRUCTURAL ENGINEERING OF SYSTEMS, SIZES AND LAYOUTS
<br />(INCLUDING TRUSS, FRAMING, AND GIRDER [DESIGN) SHALL BE BY THE
<br />RESPECTIVE SUBCONTRACTOR AND/OR SUPPLIER OF THOSE SYSTEMS
<br />OR BY OTHER NECESSARY CONSULTANTS AND SHALL BE COORDINATED
<br />BY THE GENERAL CONTRACTOR. INFORMATION SHOWN IN REGARD TO
<br />THESE CONCERNS IS ONLY DIAGRAMMATIC AND IS INTENDED TO
<br />PROVIDE AN INDICATION OF THE DESIGN INTENT ONLY. USE OF
<br />CONSULTANT DATA BY SDRC DOES NOT INFER OR ENDORSE THE
<br />ACCURACY OF THE DATA. EACH CONSULTANT AND CONTRACTOR
<br />SHALL BE RESPONSIBLE FOR CORRECTNESS AND ACCURACY OF DATA
<br />SUPPLIED BY THE RESPECTIVE CONSULTANT AND/OR CONTRACTOR.
<br />9. GENERAL CONTRACTOR SHALL COORDINATE AND SITE THE BUILDING
<br />ON THE OWNER'S LEGAL SURVEY. GENERAL CONTRACTOR TO NOTIFY
<br />OWNER AND/OR ARCHITECT OF ANY DISCOVERED DISGREPANCIES PRIOR
<br />TO ANY SITE WORK-
<br />10.
<br />ORK
<br />10. GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR SHORING AND
<br />BRACING AND FOR ALL TEMPORARY FACILITIES 6,: SERVICES, INCLUDING
<br />BUT NOT LIMITED TO POWER, WATER, TELEPHONE, FAX, SANITATION
<br />FACILITIES AND FIRE FIGHTING EQUIPMENT.
<br />11. GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR ALL REQUIRED
<br />EROSION CONTROL MEASURES AND ANY SPECIFIC, ENVIRONMENTAL
<br />IMPACT ISSUES ARISING FROM CONSTRUCTION ON THE SITE.
<br />12. GENERAL CONTRACTOR SHALL MAINTAIN THE SITE IN FIRST -GLASS
<br />CONDITION DURING THE PROJECT. ALL WASTE AND DEBRIS SHALL
<br />PROMPTLY BE REMOVED. CONSIDERATION SHALL BE GIVEN TO
<br />MATERIAL STORAGE ON THE SITE AND ITS IMPACT ON ADJOINING
<br />NEIGHBORS.
<br />13. GENERAL CONTRACTOR SHALL PROVIDE FINAL CLEANING OF ALL
<br />INTERIOR AND EXTERIOR SURFACES. ALL TRANSPARENT MATERIALS ARE
<br />TO BE LEFT IN A POLISHED CONDITION. REMOVE ALL LABELS THAT ARE
<br />NOT INTENDED TO REMAIN AS PERMANENT INSTRUCTION INFORMATION.
<br />14. GENERAL CONTRACTOR SHALL PROVIDE INSTRUCTIONS TO THE
<br />OWNER PERTAINING TO OPERATION AND MAINTENANCE OF MECHANICAL
<br />AND ELECTRICAL EQUIPMENT. COMPILE AND FORWARD TO THE OWNER
<br />ALL MAINTENANCE AND OPERATIONS DATA AND WARRANTIES IN THE
<br />FORM OF A WELL -ORGANIZED OWNER'S NOTEBOOK. AFTER PLUMBING,
<br />ELECTRICAL AND MECHANICAL ROUGH -INS ARE COMPLETED, BUT
<br />BEFORE INSULATION IS INSTALLED, GENERAL CONTRACTOR TO
<br />DOCUMENT CONDITIONS THAT WILL BE HIDDEN IN THE FINISHED HOME,
<br />AND/OR NOTIFY THE OWNER/ARGHITEGT TO DOCUMENT CONDITIONS
<br />THAT WILL BE HIDDEN IN THE FINISHED HOME, INCLUDING PLUMBING
<br />SUPPLIES, PLUMBING VENT LINES, SEWER LINES, SUMP LINES AND
<br />VENTS, HVAC TRUNKS AND DUCTS, ELECTRICAL RUNS, MAJOR BEAMS
<br />AND GIRDER TRUSSES, HEADERS, UNUSUAL OR ATYPICAL CONDITIONS,
<br />ETC,.
<br />15. ROOF TRUSS ENGINEERING AND DESIGN TO BE PROVIDED BY TRUSS
<br />SUPPLIER. TRUSS SUPPLIER TO FIELD -VERIFY ALL FRAMED DIMENSIONS
<br />AND CONDITIONS PRIOR TO TRUSS FABRICATION. TRUSS SUPPLIER TO
<br />COORDINATE FINAL TRUSS SOLUTION WITH PROJECT STRUCTURAL
<br />ENGINEER AND GENERAL CONTRACTOR. TRUSS SUPPLIER TO
<br />COORDINATE TRUSS DESIGN WITH ENERGY HEEL REQUIREMENTS.
<br />10. ALL WINDOW DESIGNATIONS ARE FOR MARVIN INTEGRITY WINDOWS,
<br />SIMILAR WINDOWS FROM ALTERNATE MANUFACTURERS MAY BE PRICED.
<br />CONTRACTOR TO MATCH SPECIFIED WINDOW SIZES AND MATERIALS AS
<br />CLOSELY AS POSSIBLE - ANY SUBSTITUTED WINDOWS TO BE AT LEAST
<br />AS LARGE AS WINDOWS SPECIFIED. WINDOWS SPECIFIED ARE EITHER
<br />PRE -FINISHED METAL WINDOWS WITH WOOD INTERIORS, OR PULTRUDED
<br />(10 CONTD)
<br />FIBERGLASS WINDOWS (WOOD AND/OR PULTRUDED FIBERGLASS
<br />INTERIORS TO BE COORDINATED WITH CLIENT AND SPECIFIC MOISTURE
<br />REQUIREMENTS OF INTERIOR SPACE) WITH DOUBLE -PANE, "LOW -E"
<br />INSULATED GLASS, STANDARD PREFINISHED COLOR, AND STANDARD
<br />HARDWARE FINISH AS SELECTED BY OWNER. WINDOWS TO MATCH
<br />SIZES AND SPECIFICATIONS TO THOSE INDICATED ON THE PLAN UNLESS
<br />OWNER AGREES OTHERWISE IN WRITING. WINDOW MANUFACTURER
<br />SHALL SUBMIT WINDOW SCHEDULE AND SHOP DRAWINGS OF ALL
<br />CUSTOM WINDOWS AND DOORS FOR G.G. 4-: OWNER REVIEW PRIOR TO
<br />FABRICATION. GENERAL CONTRACTOR AND WINDOW SUPPLIER TO
<br />CONFIRM TEMPERED GLASS LOCATIONS, HARDWARE FINISH, PATIO
<br />DOOR THRESHOLD DESIGN (A.D.A. VS. STANDARD, ETC.), EGRESS AND
<br />VENT WINDOW REQUIREMENTS, LITE PATTERNS, SIMULATED DIVIDED LITE
<br />SIZES AND DESIGN (INTERIOR SDL, EXTERIOR SDL, SPACER BAR
<br />LOCATIONS, REMOVABLE GRIDS), WINDOW SIZES, WINDOW OPERATION,
<br />JAMB SIZES, EXTENSION JAMBS, ETC,. W/OWNER.
<br />17. CABINET DRAWINGS IN THESE DRAWINGS ARE NOT CABINET SHOP
<br />DRAWINGS, BUT DEPICT DESIGN INTENT ONLY. CABINET MANUFACTURER
<br />TO COORDINATE FINAL CABINET DESIGN WITH AS -BUILT DIMENSIONS
<br />(FIELD -VERIFY), WITH FIELD CHANGES MADE DURING CONSTRUCTION,
<br />WITH FINAL MILLWORK PROFILES, WITH FINAL COUNTERTOP THICKNESS
<br />AND DESIGNS, AND WITH FINAL APPLIANCE AND FIXTURE SELECTIONS.
<br />CABINET MAKER TO VERIFY END PANEL DESIGNS AND CABINET
<br />CLEARANCES WITH OWNER PRIOR TO CABINET FABRICATION. CABINET
<br />MAKER TO MEET WITH OWNERS TO DISCUSS AND VERIFY ALL DRAWER
<br />AND CABINET DIVISIONS AND USES - INCLUDING PULLOUT LOCATIONS,
<br />SPICE PARTITION LOCATIONS, LAZY SUSAN LOCATIONS, CUTTING BOARD
<br />LOCATIONS, COST RAMIFICATIONS, HARDWARE TYPES AND QUALITY,
<br />AND ANY OTHER SUGGESTIONS THE CABINET MAKER AND/OR OWNER
<br />MAY HAVE FOR MAXIMIZING CABINETRY EFFICIENCY AND EASE OF USE.
<br />ALSO CONFIRM QUANTITIES AND OPERATION FOR HINGES / DRAWER
<br />GLIDES, KNOBS, AND PULLS. SUBCONTRAGTORS TO REFER TO
<br />APPROVED CABINET SHOP DRAWINGS PRIOR TO ROUGH FRAMING FOR
<br />CABINETS/BUILT-INS, REPORT ANY DISCREPANCIES TO G.G., OWNER AND
<br />CABINET MAKER PRIOR TO PROCEEDING WITH WORK.
<br />18. GENERAL CONTRACTOR TO COORDINATE OWNERS REVIEW AND
<br />APPROVAL OF SAMPLES OF ALL INTERIOR AND EXTERIOR FINISH
<br />MATERIALS, INCLUDING PROFILES, SIZES, SPECIES, MORTAR AND GROUT
<br />COLORS, JOINT SIZES, FINISHES AND COLORS PRIOR TO ORDERING OF
<br />SAME. SAMPLES SHALL BE PROVIDED ON-SITE WHEN OWNER DEEMS
<br />NECESSARY, AND IN SIZE LARGE ENOUGH TO SEE IN THE FINAL SPACE
<br />(E.G. 4'X4' WALL PAINT SAMPLES, AND STAINED AND FINISHED 3 -BOARD
<br />WOOD FLOOR SAMPLES). G.G. TO COORDINATE OWNERS' REVIEW AND
<br />APPROVAL OF MOCKUPS OF ALL INTERIOR AND EXTERIOR CASINGS, TRIM,
<br />NEWELS, AND RAILINGS PRIOR TO CONTRACTOR ORDERING OF SAME
<br />(ON SITE WHEN OWNER DEEMS NECESSARY). OWNER TO REVIEW AND
<br />APPROVE FULL-SIZE MOCKUPS OF ALL STONE ON SITE, INCLUDING
<br />STONE SIZE �_: SPECIES, MORTAR JOINT SIZE, MORTAR COLOR. STONE
<br />STALKING, GAP SPECIES AND SIZE, AND ANY PROTECTIVE COATINGS TO
<br />BE APPLIED (SILOXANE, ETC.). STONE SAMPLES SHALL BE DISPLAYED
<br />ALONGSIDE RELEVANT INTERIOR AND EXTERIOR FINISH MATERIALS, AS
<br />REQUIRED FOR FINAL COLOR PALLET COORDINATION. O.C. TO
<br />GOORDDNATE OWNER'S COUNTERTOP SELECTIONS, AND SHALL VERIFY
<br />THAT NATURAL STONE SLABS THAT OWNER SELECTS ARE PROPERLY
<br />STORED, AND USED IN THE FINAL PROJECT.
<br />10. DIMENSIONS LOCATING EXTERIOR WALLS ARE TO THE EXTERIOR
<br />=ACE OF SHEATHING AND/OR FACE OF FOUNDATION WALLS, UNLESS
<br />NOTED OTHERWISE. DIMENSIONS ;GATING INTERIOR WALLS ARE TO
<br />CENTERLINE OF STUD, UNLESS NOTED OTHERWISE. DIMENSIONS
<br />LOCATING DOORS AND WINDOWS ARE TO CENTERLINE OF OPENING,
<br />UNLESS NOTED OTHERWISE. SEE DIMENSIONS KEYS ON
<br />ARCHITECTURAL DRAWINGS FOR ADDITIONAL INFORMATION.
<br />20. ALL .X`={ OR `� _ ---�_ 3E 2xG AS PER BUILDING SECTIONS,
<br />U.N.O. A 8= -�.< \G `� �._� . ..B \0 WALLS, AND WALLS WITH
<br />POCKET DOORS -O B= 2xc _-_-\3—<_,-TION, U.N.O. VERIFY POTENTIAL
<br />2x6 ACG -S- WITH OWNER. ALL OTHER WALLS
<br />TO BE 2x-= CC\=--{JGTIO\ -✓ -- �`\`SS SHOWN ON ARCHITECTURAL
<br />AND STR_C { Z.RA1\ \ �.\.O. HEADERS SHALL BE SIZED PER
<br />STRUCT < PANS,
<br />-'-:Z \.ATED WITH STRUCTURAL ENGINEER
<br />AND/OR -<.:SS AND I PPLIER.
<br />21. PRO\. ::�E ACOUSTIC INSULATION AND PARTITIONS PER
<br />ARCHITECTURAL DOCUMENTS (SEE SPEC. ALTERNATES AND DRAWINGS).
<br />CONTRACTOR TO VERIFY ACOUSTIC INSULATION LOCATIONS W/OWNER
<br />PRIOR TO ISSUING SWORN CONSTRUCTION STATEMENT, AND AGAIN
<br />PRIOR TO VAPOR BARRIER $ DRYWALL INSTALLATION. ACOUSTIC
<br />CONSIDERATION TO BE GIVEN TO HVAC DUCT LAYOUTS AND PLUMBING
<br />LOCAT`.ONS, AND ACOUSTIC DAMPENING TO BE PROVIDED TO HVAC
<br />SYSTE"I AND PLUMBING WASTE STACKS AS REQUIRED TO MINIMIZE
<br />SOUND TRANSMISSION.
<br />22. PLUMBING ROUGH -IN DIMENSIONS ARE PROVIDED FOR REFERENCE
<br />ONLY. ALL PLUMBING DIMENS►ONS ARE TO BE COORDINATED BY THE
<br />GENERAL CONTRACTOR AND/OR PLUMBING SUBCONTRACTOR WITH
<br />SPECIFIC FIXTURE SELECTIONS AND FINAL CABINET DESIGN. ALL FLOOR
<br />DRAINS CONNECTED TO SANITARY SEWER TO HAVE BACK-FLOW
<br />PREVENTERS INSTALLED.
<br />23. MECHANICAL EQUIPMENT � CONTROL LOCATIONS TO BE VERIFIED
<br />WITH OWNER PRIOR TO INSTALLATION - SEE DRAWINGS FOR PROPOSED
<br />LOCATIONS. MAKEUP AIR TO BE PROVIDED AS PER MINNESOTA
<br />RESIDENTIAL_ CODE, I.R.G. AND ANY OTHER APPLICABLE CODES. SUPPLY
<br />AND RETURN REGISTER COVER DESIGNS AND LOCATIONS TO BE
<br />APPROVED BY OWNER - ASSUME FLUSH WOOD VENTS TO MATCH
<br />WOOD FLOOR SPECIES $ FINISH FOR BID. WHERE AFFECTED BY
<br />MECHANICAL DUCTS AND EQUIPMENT, CEILING HEIGHTS AND SOFFIT
<br />SIZES AND LOCATIONS TO BE APPROVED BY OWNER PRIOR TO
<br />INSTALLATION OF HVAG DUCTS AND EQUIPMENT.
<br />24. DOOR $ DOOR HARDWARE SHALL BE BY GENERAL CONTRACTOR.
<br />SUBMIT SCHEDULES AND SHOP DRAWINGS FOR OWNER AND ARCHITECT
<br />REVIEW AND APPROVAL PRIOR TO FABRICATION.
<br />LAKESIDE FROM SOUTHWEST CORNER
<br />STREETSIDE FROM SOUTHEAST CORNER
<br />KESIDE FROM NORTHWEST GORNER
<br />%W_�
<br />t
<br />t�
<br />464 SECOND STREET PHONE: 952-470-3750
<br />SUITE 100 FAX: 352-767-5859
<br />EXCELSIOR, MN 553.31 nfo@sharrattdesign.com
<br />SHEET INDEX
<br />Sur -1
<br />EXISTING SURVEY
<br />5ur-2
<br />PROPOSED SURVEY
<br />AO
<br />GENERAL NOTES $ RENDERINGS
<br />Al
<br />SITE PLAN
<br />A2
<br />LOWER LEVEL PLAN
<br />A3
<br />MAIN LEVEL PLAN
<br />A4
<br />UPPER LEVEL PLAN
<br />A5
<br />ROOF PLAN
<br />A8
<br />ELEVATIONS
<br />A7
<br />ELEVATIONS
<br />A8
<br />BUILDING SECTIONS DETAILS
<br />A9
<br />BUILDING SECTIONS DETAILS
<br />A10
<br />TYP. WALL SECTIONS
<br />All
<br />DETAILS
<br />51
<br />STRUCTURAL PLANS
<br />52
<br />STRUGTURAL PLANS
<br />PROJECT TEA -1
<br />ARCHITECT
<br />SHARRATT DESIGN � COMPANY
<br />CONTACT: MIKE 5HARRATT
<br />PHONE: (352) 470-9750
<br />EMAIL: msharratt@sharro-ttdesign.com
<br />STRUCTURAL ENGINEER
<br />LARSON ASSOCIATES, ING.
<br />CONTACT: JED LAR50N
<br />CELL: (763) 682-0530
<br />EMAIL: !arson jed@gmail.com
<br />GENERAL CONTRACTOR
<br />EVERLAST ENTERPRISES
<br />CONTACT: JIM CLEARY
<br />PHONE: (612) 868-0748
<br />EMAL: jim@everlastenterprises.com
<br />PROPOSED DESIGN FOR:
<br />WEBBER
<br />HOME
<br />2635 Casco Point Rd
<br />Wayzata, MIN 55.3.1
<br />SHEET
<br />a(
<br />LEGAL NnTI .
<br />THESE DOCUMENTS SHALL NOT BE REPRODUCED OR
<br />REDISTRIBUTED WITH OUT EXPRESSED WRITTEN
<br />CONSENT OF SHARRATT DESIGN $ COMPANY, LLC•
<br />O COPYRIGHT 2018 SHARRATT DESIGN
<br />COMPANY LLC.
<br />•
<br />•
<br />•
<br />ISSUE DATE
<br />12/13/17
<br />12/22/17
<br />•
<br />03/17/18
<br />03/23/18
<br />04/23/18
<br />PROPOSED DESIGN FOR:
<br />WEBBER
<br />HOME
<br />2635 Casco Point Rd
<br />Wayzata, MIN 55.3.1
<br />SHEET
<br />a(
<br />LEGAL NnTI .
<br />THESE DOCUMENTS SHALL NOT BE REPRODUCED OR
<br />REDISTRIBUTED WITH OUT EXPRESSED WRITTEN
<br />CONSENT OF SHARRATT DESIGN $ COMPANY, LLC•
<br />O COPYRIGHT 2018 SHARRATT DESIGN
<br />COMPANY LLC.
<br />
|