|
Job —.- ---------'Truss----- ---- Truss Type -- ------- Oty Ply
<br /> 001 F15 FLOOR 1 1
<br /> Job Reference(optional)
<br /> .P&M Truss Inc.,Isanti,MN 55040 --- -- - - - 7.220 s Dec 29 2009 MiTek Industries,Inc. Wed Feb 01 12:37:52 2012 Page 1
<br /> 0-5-7
<br /> I—�I 2-3-7 I I 0-10-11
<br /> P5110712kme.12e2
<br /> 6w)= 34= 3..= 15.111 344= 15.11 348 FP= 3,4= 15.11 >4= 15011 46= 56= 15.11
<br /> 1 2 3 i4— 5 6 ] B 9 10 11 12 13 14 15
<br /> 441
<br /> – _ _ –i * . ,: 9
<br /> W
<br /> • �- 9
<br /> 1 8T, o D2 0 ®- I o 0
<br /> 25 24 23 22 21 20 19 18 56—17 18
<br /> 15.11 46= 4x5= 36= 3410 Mi18 FP= 36= 46= 1.5.11
<br /> 3a4=
<br /> 0-5-7 21-1-5 121-10-9 1
<br /> 10-5-71 20-7-14 0-9-4
<br /> Plate Offsets(X,Y):[2:0-1-8,Edge[,(4:0-1-8,Edgel,[13:0-1-8,Edge[,[18:0-1-8,Edgel,[24:0-1-8,Edge)
<br /> LOADING(psf) SPACING 1-4-0 CSI DEFL in (Ioc) I/dell Ud PLATES GRIP
<br /> TCLL 40.0 Plates Increase 1.00 TC 0.32 Vert(LL) -0.27 20-22 >945 360 MT20 197/144
<br /> TCDL 15.0 Lumber Increase 1.00 BC 0.90 Vert(TL) -0.49 20-22 >525 240 MT16 116/127
<br /> BCLL 0.0 Rep Stress Incr YES WB 0.43 Horz(TL) 0.00 16 n/a n/a
<br /> BCDL 5.0 Code MNSRC/TPI2002 (Matrix) Weight:94 lb
<br /> LUMBER BRACING
<br /> TOP CHORD 4 X 2 SPF No.2 TOP CHORD sheathed or 6-0-0 oc purlins:1-15.
<br /> BOT CHORD 4 X 2 SPF No.2 BOT CHORD Rigid ceiling directly applied or 10-0-0 oc bracing.
<br /> WEBS 4X2SPFNo.2
<br /> REACTIONS (lb/size) 2=890/0-3-8, 16=852/Mechanical
<br /> FORCES (Ib)-Maximum Compression/Maximum Tension
<br /> TOP CHORD 2-25=0/8,15-16=-24/0,1-2=0/0,2-3.-1329/0,3-4=-1326/0,4-5=-1796/0,5-6=-1796/0,6-7=3134/0,7-8=-3134/0,8-9=-3134/0,9-10=-3184/0,10-11=-3184/0,11-12=-1952/0,12-13=-1952/0,13-14=-814/0,14-15=0/0
<br /> BOT CHORD 24-25=0/0,23-24=0/1326,22-23=0/2617,21-22=0/3307,20-21=0/3307,19-20=0/2714,18-19=0/814,17-18=0/462,16-17=0/462
<br /> WEBS 13-18=-796/0,13-19=0/1310,12-19=-178/0,11-19=-883/0,11-20=0/545,10-20=-172/0,9-20=-142/0,9-22.-201/0,7-22=-170/0,6-22=0/598,6-23=-951/0,5-23=-129/0,4-23=0/791,2-24=0/1510,4-24=-718/0,
<br /> 14-18=0/882,14-17=0/0,14-16=-945/0
<br /> NOTES (6)
<br /> 1)All plates are MT20 plates unless otherwise indicated.
<br /> 2)Refer to girder(s)for truss to truss connections.
<br /> 3)Recommend 2x6 strongbacks,on edge,spaced at 10-0-0 oc and fastened to each truss with 3-10d(0.131"X 3")nails. Strongbacks to be attached to walls at their outer ends or restrained by other means.
<br /> 4)Gap between inside of top chord bearing and first diagonal or vertical web shall not exceed 0.500in.
<br /> 5)CAUTION,Do not erect truss backwards.
<br /> 6)This truss is designed in accordance with the Minnesota State Residential Building Code.No increased unbalanced loads or drift loads have been considered.The building designer should verify the adequacy of the design loads as
<br /> the component is incorporated into the overall structure.
<br /> LOAD CASE(S)Standard
<br />
|