2003 - Compliance Cert. - Laserfiche WebLink

Home Browse Search

• REScheck Inspection Checklist 1995 MEC REScheckSoftware Version 3.5 Release la DATE: 05/30/03 TITLE:Addition and Remodeling for the Myhran Residence Bldg. Dept. Use Ceilings: [ ] 1. Ceiling 1: Raised or Energy Truss,R-44.0 cavity insulation Comments: Insulation must achieve full height over the plate lines of exterior walls. Above-Grade Walls: [ ] 1. Wall 1:Wood Frame, 16"o.c.,R-19.0 cavity insulation Comments: Windows: [ ] 1. Window 1: Wood Frame:Double Pane with Low-E,U-factor:0.350 For windows without labeled U-factors,describe features: #Panes Frame Type Thermal Break?[ ]Yes[ ]No Comments: Doors: [ ] 1. Door 1: Solid,U-factor:0.300 Comments: [ ] 2. Door 2:Glass,U-factor:0.350 Comments: Floors: [ ] 1. Floor 1:All-Wood Joist/Truss:Over Outside Air,R-38.0 cavity insulation Comments: Crawl Space Walls: [ ] 1. Crawl 1:Masonry Block with Empty Cells,4.0'ht/3.5'bg/3.5'insul, R-10.0 cavity insulation Comments: Applies to walls of unventilated crawl spaces. Air Leakage: [ ] Joints,penetrations,and all other such openings in the building envelope that are sources of air leakage must be sealed. [ ] Recessed lights must be 1)Type IC rated,or 2)installed inside an appropriate air-tight assembly with a 0.5"clearance from combustible materials.If non-IC rated,the fixture must be installed with a 3"clearance from insulation. Vapor Retarder: [ ] Required on the warm-in-winter side of all non-vented framed ceilings,walls,and floors. Materials Identification: [ ] Materials and equipment must be identified so that compliance can be determined. [ ] Manufacturer manuals for all installed heating and cooling equipment and service water heating equipment must be provided. [ ] Insulation R-values and glazing U-factors must be clearly marked on the building plans or specifications.