Laserfiche WebLink
e � <br /> (3) Where such changes increase the total usable floor area of an existing nonconforming building <br /> by 25 percent or more, the property owner shall be required to bring the building and property <br /> into full conformance with this division. The requirements for bringing improvements into <br /> conformance shall also be applied to legal, nonconforming site improvements such as parking <br /> lots and landscaping. The 25 percent threshold shall be measured cumulatively from the date of <br /> the adoption of this division. <br /> (f) All buildings in the I, Industrial District shall be required to be on platted lots. All changes to lot <br /> configuration shall require platting in accordance with chapter 82, article III, Orono Subdivision Regulations. <br /> No lot identified in whole or in part by a metes and bounds description shall be eligible for a building permit <br /> until a final plat has been approved and recorded for said lot. <br /> (Ord. No. 32 3rd series, § 2, 3-27-2006) <br /> Sec. 78-822. Permitted uses. <br /> (a) General conditions. The following are permitted uses within the I-Industrial District. <br /> (1) Automobile and truck painting, major repair, body and fender work, upholstering tire recapping <br /> and wholesale/fleet sales, but shall not include retail when within a completely enclosed <br /> building. The storage of automobiles or trucks in process of repair shall be within a fenced area. <br /> (2) Cabinet and carpentry shops, lumberyards millworks, electrical, plumbing and heating and air <br /> conditioning shop. <br /> (3) Manufacturing or assembly of a wide variety of products that produces no exterior noise, glare, <br /> fumes, obnoxious products, byproducts or wastes, or creates other objectionable impact on the <br /> environment. These shall include the following: <br /> a. Manufacturing, compounding, assembly,packaging, treatment or storage of products and <br /> materials. Expressly prohibited activities shall include: the stockpiling and recycling of <br /> aggregate materials or supplies of more than 25 cubic yards. <br /> (4) Office. <br /> (5) Office--Showroom. <br /> (6) Office--Warehouse. <br /> (7) Medical, dental and optical laboratories. <br /> (8) Research laboratories. <br /> (9) Inside storage or warehousing. <br /> (10) Governmental and public utility buildings and structures. <br />