Laserfiche WebLink
• <br /> !, <br /> REScheck Inspection Checklist <br /> 2000 IECC <br /> RES check Sofware Version 3.6 Release 2 <br /> DATE: 08/05/05 <br /> Bldg. <br /> Dept. <br /> Use <br /> Ceilings: <br /> [ ] 1. Ceiling 1: Raised or Energy Truss, R-44.0 continuous insulation <br /> Comments: <br /> Insulation must achieve full height over the plate lines of exterior walls. <br /> Above-Grade Walls: <br /> [ ] 1. Wall 1: Wood Frame, 16" o.c., R-19.0 cavity insulation <br /> Comments: <br /> Basement Walls: <br /> [ ] 1. Basement Wall 1: Masonry Block with Empty Cells, 9.0' ht/8.5'bg/9.0' insul, <br /> R-13.0 continuous insulation <br /> Comments: <br /> Exterior insulation must have a rigid, opaque, weather-resistant protective covering that <br /> covers the exposed(above-grade)insulation and extends at least 6 in. below grade. <br /> Windows: <br /> [ ] 1. Window 1: Vinyl Frame:Double Pane with Low-E, U-factor: 0.330 <br /> For windows without labeled U-factors, describe features: <br /> #Panes Frame Type Themial Break? [ ]Yes [ ]No <br /> Comments: <br /> Doors: <br /> [ ] 1. Door 1: Solid, U-factor: 0.350 <br /> Comments: <br /> Heating and Cooling Equipment: <br /> [ ] 1. Furnace 1: Forced Hot Air, 92 AFUE or higher <br /> Make and Model Number <br /> [ ] 2. Air Conditioner 1: Electric Central Air, 13 SEER or higher <br /> Make and Model Number <br /> Air Leakage: <br /> [ ] Joints, penetrations, and all other such openings in the building envelope that are sources of air <br /> leakage must be sealed. <br /> [ ] Recessed lights must be 1)Type IC rated, or 2)installed inside an appropriate air-tight assembly <br /> with a 0.5" clearance from combustible materials. Ifnon-IC rated, the fixture must be installed with a <br /> 3" clearance from insulation. <br /> Vapor Retarder: <br /> [ ] Required on the warm-in-winter side of all non-vented framed ceilings, walls, and floors. <br />