Laserfiche WebLink
CIREScheck Software Version 4.1.0 <br /> Inspection Checklist <br /> Date: 11/26/08 <br /> Ceilings: <br /> ❑ Ceiling 1:Flat Ceiling or Scissor Truss,R-40.0 cavity+R-40.0 continuous insulation <br /> Comments: <br /> Above-Grade Walls: <br /> ❑ Wall 1:Insulated Concrete Forms,R-22.0 assembly R-value <br /> Comments: <br /> ❑ Wall 2:Wood Frame,16"o.c.,R-19.0 cavity insulation <br /> Comments: <br /> Basement Walls: <br /> ❑ Basement Wall 1:Insulated Concrete Forms,9.0'ht/8.6'bg/9.0'insul,R-22.0 assembly R-value <br /> Comments: <br /> Exterior insulation has a rigid,opaque,weather-resistant protective covering that covers the exposed(above-grade)insulation and <br /> extends at least 6 in.below grade. <br /> Windows: <br /> ❑ Window 1:Wood Frame:Double Pane,U-factor:0.350 <br /> For windows without labeled U-factors,describe features: <br /> #Panes Frame Type Thermal Break? Yes No <br /> Comments: <br /> Doors: <br /> ❑ Door 1:Glass,U-factor:0.350 <br /> Comments: <br /> ❑ Door 2:Solid,U-factor:0.350 <br /> Comments: <br /> Floors: <br /> ❑ Floor 1:All-Wood Joist/Truss:Over Outside Air,R-38.0 cavity+R-38.0 continuous insulation <br /> Comments: <br /> Air Leakage: <br /> ❑i Joints,penetrations,and all other such openings in the building envelope that are sources of air leakage are sealed. <br /> ❑ Recessed lights are 1)Type IC rated,or 2)installed inside an appropriate air-tight assembly with a 0.5"clearance from <br /> combustible materials.If non-IC rated,fixtures are installed with a 3"clearance from insulation. <br /> Vapor Retarder: <br /> ❑ Installed on the warm-in-winter side of all non-vented framed ceilings,walls,and floors. <br /> Materials Identification: <br /> ❑ Materials and equipment are installed in accordance with the manufacturer's installation instructions. <br /> ❑ Materials and equipment are identified so that compliance can be determined. <br /> ❑ Manufacturer manuals for all installed heating and cooling equipment and service water heating equipment have been provided. <br /> ❑ Insulation R-values and glazing U-factors are clearly marked on the building plans or specifications. <br /> ❑ Insulation is installed according to manufacturer's instructions,in substantial contact with the surface being insulated,and in a <br /> manner that achieves the rated R-value without compressing the insulation. <br /> Orono-4701 WestBranch Page 2 of 4 <br />