2010 - 00380 - fire alarm system

Home Browse Search

Intrusion Systems l D7412G Control Panel ,. ., I BOSCH Invented for life D7412G Control Panel ► Digital communicator with phone line monitor(loop or BOSCH ground start) ► Multiple telephone numbers,primary and duplicate paths with main and alternate destinations ► All reports within each of four route groups are programmable ► Optional dual phone line switcher monitors two phone lines tr......► ► Optional network interface module for two-way i communication over Ethernet networks ► Automatic test and status reports # "' �'; ► Time windows for arming and open and close report Iwo suppression ► Programmable answering machine solution for remote programming on shared phone lines The D7412G Control Panel provides an integrated solution The D7412G Control Panel provides up to 75 individually for Access Control, Security, and Fire Alarm system identified points. Each point accommodates normally open applications.The control panel is capable of monitoring (NO) and or normally closed (NC) devices with end-of-line alarm points for intruder or fire alarms while operating user (EOL) resistor supervision. Each point is programmable for command centers and other outputs.The control panel fire,fire supervisory, or burglary applications. includes a communicator that reports events to selected System Response PSTN or IP network destinations through four • 31 custom point indexes, including fire supervisory programmable route groups. Programming and accessory • Selectable point response time modules offer flexibility and beneficial features rarely found • Cross point compatibility in other security control systems. • Fire alarm verification • Fire inspector's local test The D7412G Control Panel provides eight on-board points, • Watch mode up to 67 off-board points,64 relays,and two access control • Scheduled events (skeds) arm,disarm, bypass and doors. Grant access from a Wiegand style card reader unbypass points,control relays,control authority levels, connected to:a D9210B Access Control Module,a request- and control door access to-enter or request-to-exit input, or a keypad. User Interface • Supervises up to eight command centers or keypads(up to 32 non-supervised command centers or keypads can be used) Functions • Custom command center text Programmable Outputs • Full function command menu including custom • 2 A alarm power at 12 VDC functions • 1.4 A auxiliary power at 12 VDC • Each user has authority by area and 16-character name • Four alarm output patterns • 14 custom authority levels control user's authority to • Automatic bell test change,add,delete passcodes or access control • Programmable bell shut-off timer tokens/cards,disarm, bypass points, and initiate system tests www.boschsecurity.com