2010 - 00213 - sprinkler system - Laserfiche WebLink

Home Browse Search

Installation Quick response sprinklers are intended for installation as tie vacuuming. Remove any sprinkler which has been specified in NFPA 13,FM Global Loss Prevention Data Sheet painted (other than factory applied) or damaged in any 2-8N or other applicable standards. Quick response sprin- way. A stock of spare sprinklers should be maintained to klers and standard response sprinklers should not be inter- allow quick replacement of damaged or operated sprin- mixed. klers. Prior to installation,sprinklers should be maintained The Model F1 FR Recessed Quick Response Sprinklers are to in the original cartons and packaging until used to mini- be installed as shown.The Model Fl or F2 Escutcheons illus- mize the potential for damage to sprinklers that would trated are the only recessed escutcheons to be used with the cause improper operation or non-operation. Model Fl FR Sprinklers. The use of any other recessed escutch- Sprinkler Types eon will void all approvals and negate all warranties. When installing Model Fl FR Sprinklers,use the Model D Sprin- Upright kler Wrench. When installing Model Fl FR Recessed Pendent or Standard Pendent Sidewall Sprinklers,use the Model GFR1 Sprinkler Wrench. Any Conventional other type of wrench may damage these sprinklers. Sidewall(Vertical, Horizontal HSW1) Glass bulb sprinklers have orange bulb protectors to minimize Recessed Pendent bulb damage during shipping, handling and installation. RE- Recessed Horizontal Sidewall HSW1 MOVE THIS PROTECTION AT THE TIME THE SPRINKLER l+)(2) SYS I EM IS PLACED IN SERVICE FOR FIRE PROTECTION.Re- Finishes moval of the protectors before this time may leave the bulb vul- Standard Finishes nerable to damage. RASCO wrenches are designed to install Sprinkler Escutcheon sprinklers when covers are in place. REMOVE PROTECTORS Bronze Brass BY UNDOING THE CLASP BY HAND. DO NOT USE TOOLS Chrome Plated Chrome Plated(3) TO REMOVE THE PROTECTORS. White Polyester Coated(4) White Painted(3) Temperature Ratings Special Application Finishes Sprinkler Sprinkler Escutcheon Classification Temperature Max.Ambient Bulb Bright Brass Bright Brass Sc Temp. Color Black Plated Black Plated Ordinary 57 135 100°F(38°C) Orange Black Paint Black Paint Ordinary 68 155 100°F(38'C) Red Off White Off White Intermediate 79 175 150°F(66°C) Yellow Satin Chrome Satin Chrome Intermediate 93 200 150°F(66°C) Green High(t) 141 286 225°F(107°C) Blue 111 Other finishes and colors are available on special order. Consult the factory for details. (11 Not available for recessed sprinklers. (2) FM Approvals is limited to bronze and brass,chrome or black Escutcheon Data plated finishes only. (3) FP Push-on/Thread-off escutcheon. Escutcheon „A, Face of Fitting 141 UL and ULC listed corrosion resistance. Model Approvals Adjustment p SIN numbers:R3621,R3622,R3623,R3625. Wail Dimension 1y„ Note: For y" orifice pendent FM approved white Fl 1,2,4,8 Max Recess (38.1mm) 316°-1.16 polyester coated and UL approved white polyester Min Recess 3;° (5mm-24mm) corrosion resistant sprinklers refer to Bulletin 014. (19.1mm) 1y„ Ordering Information F2 12,3,4,5,7,8 Max Recess (38.1mm) 316°-11161 Min Recess tr,6 ( -17mm) Specify: (24mm) 1. Sprinkler Model FP 1,2 "Recessed '/,s l 1y°(38.1mm) 2. Sprinkler Type Push (11mm) 3. Orifice Size Thread-off 1,2 Min Recessed (24 m) 1"(25.4mm) 4. Deflector Type No Dimensional Figure for FP 5. Temperature Rating 6. Sprinkler Finish Maintenance 7. Escutcheon Type The Models F1 FR and Fl FR Recessed Sprinklers 8. Escutcheon Finish (where applicable) should be inspected quarterly and the sprinkler system maintained in accordance with NFPA 25. Do not clean Note: When Model F1 FR Recessed sprinklers are sprinklers with soap and water, ammonia or any other ordered, the sprinklers and escutcheons are packaged cleaning fluids. Remove dust by using a soft brush or gen- separately. The equipment presented in this bulletin is to be installed in accordance with the latest pertinent Standards of the National Fire Protection Association,Factory Mutual Research Corporation,or other similar organizations and also with the provisions of governmental codes or ordinances whenever applicable Products manufactured and distributed by Reliable have been protecting life and property for over 80 years,and are installed and serviced by the most highly qualified and reputa- ble sprinkler contractors located throughout the United States,Canada and foreign countries. Manufactured by MOMMOMMINEMMEMEMN_ O The Reliable Automatic Sprinkler Co.,Inc. ® oe I . e ab'e (800)431-1588 Sales Offices (800)848-6051 Sales Fax Corporate Offices Revision lines indicate updated or new data (914)829-2042 www.reliablespnnkler.com Internet Address EG PnnteO in U.S.A 3/07 PIN9999970027