Onsite sewage treatment system - Laserfiche WebLink

Home Browse Search

4. MOUND SIZING A. Calculate Clean Sand Lift: 3 feet minus Depth to Limiting Condition (1.C)= Clean Sand Lift (1 ft minimum) 3.0 ft - 1.2 ft = 1.8 ft B. Calculate Upslope Height: Clean Sand Lift (4.A)+media depth (1 ft.)+cover (1 ft.)= Upslope Height 1.8 ft + 1.0 ft + 1.0 ft= 3.8 ft D•34:Slope Multiplier Table Land Slope% 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Upslope 3:1 3.00 2.91 2.83 2.75 2.68 2.61 2.54 2.48 2.42 2.36 2.31 2.26 2.21 2.17 2.13 2.09 2.06 2.03 2.00 1.97 1.55 1.93 1.9 1.89 1.87 1.85 Berns Ratio 4:1 4.08 3.85 3.70 3.57 3.45 3.33 3.23 3.12 3.03 2.94 2.86 2.78 2.70 2.62 2.55 2.48 2.41 2.35 2.29 2.23 2.19 2.13 2.08 2.03 1.98 1.93 Land Slope% 0 I 2 3 4 5 6 7 8 9 10 II 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Downslope 3:1 3.00 3.09 3.19 3.30 3.41 3.53 3.66 3.80 3.95 4.11 4.29 4.48 4.69 4.95 5.24 5.55 5.88 6.24 6.63 7.04 7.47 7.93 9.42 9.933 9.46 '0.02 Berns Ratio 4:1 4.00 4.17 4.35 4.54 4.76 5.00 5.26 5.56 5.8.8 6.25 6.67 7.14 7.69 8.29 8.92 9.57 10.24 10.94 11.67 12.42 13.19 13.99 14.82 15.67 16.54 17.44 C Select Upslope Berm Multiplier (based on land slope): 3.33 (figure D-34) D. Calculate Upslope Berm Width:Multiplier (4.C)X Upslope Mound Height (4.B)=Upslope Berm Width 3.33 ft x 3.8 ft = 12.0 ft E. Calculate Drop in Elevation Under Bed: Bed Width (2.B) X Land Slope (1.D): 100=Drop (ft) 10.0 ft X 5.00 % : 100= 0.50 ft F. Calculate Downslope Mound Height: Upslope Height (4.B)+Drop in Elevation (4.E)=Downslope Height 3.8 ft + 0.50 ft = 4.3 ft G Select Downslope Berm Multiplier (based on land slope): 5.00 (figure D-34) H. Calculate Downslope Berm Width:Multiplier (4.G)X Downslope Height (4.F)=Downslope Berm Width 5.00 x 4.3 ft = 21.0 ft I. Calculate Minimum Berm to Cover Absorption Area:Downslope Absorption Width (3.B or 3.C)+4 ft. =ft 10.0 ft + 4 ft = 14.0 ft J. Design Downslope Berm =greater of 4H and 41: 21.0 ft K. Select Endslope Berm Multiplier: 3.00 (usually 3.0 or 4.0) L. Calculate Endslope Berm (4.K)X Downslope Mound Height (4.F)=Endslope Berm Width 3.00 ft X 4.3 ft = 13.0 ft M. Calculate Mound Width: Upslope Berm Width(4.D)+Bed Width (2.B)+Downslope Berm Width (4.J)=ft 12.0 ft + 10.0 ft + 21.0 ft = 43.0 ft N. Calculate Mound Length: Endslope Berm Width (4.L)+Bed Length (2.C)+Endslope Berm Width (4.L)=ft 13.0 ft + 50.0 ft + 13.0 ft = 76.0 ft