Laserfiche WebLink
1. MATERIALS, EQUIPMENT & <br /> SPECIFICATIONS <br /> ae <br /> pjoi4KSTRAND <br /> t i <br /> COMPANIES INC- <br /> GENSi4AL WWRAcl6H INTRODUCTION <br /> The purpose of this manual is to clearly demonstrate to the Roof <br /> 11919 Lare Industrial Blvd. office:(952)895-9288 Installer, Contractor, Distributor and Architectural Designer, the <br /> Burnsville.MN 55337 Fax:(952)895-7411 recommended installation procedures for both re-roofing and new <br /> construction roofing with Gerard products. <br /> "!84":S!s's'Y'hen+s+tafi llri'T�SSfit`CY" <br /> The illustrations and information in this manual emphasize United <br /> GERARD DISTRIBUTOR / DEALER States roofing practices used today and are subject to change without <br /> notice. Intemational applications are similar though may differ in some <br /> ways. If using this manual for applications not covered, consult the <br /> Gerard Technical Services Division. <br /> LIABILITY <br /> This manual provides suggested application techniques only and is <br /> not to be substituted for any local building code specifications. The <br /> suggested installation techniques contained herein have been <br /> developed by Gerard Roofing Technologies as acceptable,tested and <br /> proven methods of installing Gerard products. Because Gerard <br /> Roofing Technologies has no control over the installation techniques <br /> used with its products,no warranty is expressed or implied relating to <br /> installation. <br /> IMPORTANT NOTE <br /> Gerard stone-coated steel roofing is a versatile roof system that <br /> may be installed over open rafters,however,using an open-rafter <br /> roof deck may present difficulties or even safety hazards to an <br /> GERARD ROOFING TECHNOLOGIES inexperienced installation crew. This is due to working with "self <br /> supporting"underlayments over large rafter spans on the open <br /> roof deck. To reduce the risk of unsatisfactory installation and/or <br /> 955 Columbia Street personal injury, it is advisable to solid-sheath the roof deck (or <br /> space-sheath and use 1"x 4" counter-battens) to create a solid <br /> Brea, California USA 92821-2923 work surface. <br /> Gerard Roofing Technologies assumes no liability for either <br /> CUSTOMER SERVICE DEPARTMENT incorrect installation of its products or personal injury that may <br /> Phone: 800-23-ROOFS (237-6637) occur as a result of installing its products. <br /> Phone: 714-529-0407 <br /> Fax: 714-256-1476 <br /> E-Mail: info@gerardusa.com <br /> Internet: http://www.gerardusa.com METRIC CONVERSION INFORMATION <br /> U.S.to Metric Metric to U.S. <br /> GERARD BRAND STONE COATED STEEL ROOFING MATERIALS <br /> ARE MANUFACTURED AND SOLD BY GERARD ROOFING 1 inch=25.4 mm. 1 mm.=0.0394 ins. <br /> TECHNOLOGIES, INC., LOCATED IN BREA, CALIFORNIA, USA. 1 Ft. =305 mm. 1 m. =39.37 ins. <br /> GERARD ROOFING TECHNOLOGIES INC. IS NOT AFFILIATED WITH 1 Ft. =0.3048 m. 1 m =3.281 Ft. <br /> ANY COMPANIES OPERATING UNDER THE TRADE NAME <br /> "GERARD" OR VARIATIONS THEREOF OUTSIDE THE UNITED 1 Sq. Ft. =0.093 Sq.m. 1 Sq.m. =10.76 Sq.Ft. <br /> STATES OF AMERICA AND CANADA. 100 Sq.Ft. =9.29 Sq.m. =0.108 Squares <br /> * Specifications within this document are 1 Lb. ==0.4 0.4 g. 1 g. =0.0022 54 kg. 1 kg. =2.205 Lb. <br /> subject to change without notice, contact <br /> Gerard for an updated copy of this manual. 1 U.S.Gal =3.785 L. 1 L. = 0.264 U.S.Gal. <br /> 721'GERARD® Page 2 ©Gerard Roofing Technologies,2001-03-01 <br />