2014-asbestos testing - Laserfiche WebLink

Home Browse Search

Client: Nova Industries Job No.: TJ1768-4 Date: June 26, 2014 uwtas Page 3 of 3 I Results I I Duct Armor Encapsulated Samples Un-Encapsulated Samples Sample No. 1 2 3 4 1 2 3 4 Failure Point(lbf) 409 313 345 203 413 86* 279 304 Failure Point(psi) 34.08 26.08 28.75 16.92 34.42 7.17* 23.25 25.33 Failure Point(Ibf/ft2) 4,908 3,756 4,140 2,436 4,956 1,032* 3,348 3,648 Duration of Test 8 sec. 1 2 sec. 4 sec. 3 sec. 6 sec. 1 2 sec. 1 9 sec. 5 sec. Failure Point Average(lbf/ft2) 3,810 3,984 *Sample was not used in the calculations due to exceeding the acceptable limits Sample Failure Description Duct Armor Encapsulated Sample 1 Cohesive Failure within Un-Encapsulated Material Duct Armor Encapsulated Sample 2 Cohesive Failure within Un-Encapsulated Material Duct Armor Encapsulated Sample 3 Cohesive Failure within Un-Encapsulated Material Duct Armor Encapsulated Sample 4 Cohesive Failure within Un-Encapsulated Material Un-Encapsulated Sample 1 Cohesive Failure within Un-Encapsulated Material Un-Encapsulated Sample 2 Cohesive Failure within Un-Encapsulated Material Un-Encapsulated Sample 3 Cohesive Failure within Un-Encapsulated Material Un-Encapsulated Sample 4 Cohesive Failure within Un-Encapsulated Material Requirements: The load required to cause adhesion or cohesion failure of the encapsulated matrix shall not be less than the load required to cause failure of the unencapsulated matrix, and in no case shall the load be less than 2.4 kPa (50 Ibffft2). II * END OF TEST REPORT**" I I I THIS REPORT IS THE CONFIDENTIAL PROPERTY OF THE CLIENT ADDRESSED.THE REPORT MAY ONLY BE REPRODUCED IN FULL.PUBLICATION OF EXTRACTS FROM THIS REPORT IS NOT PERMITTED WITHOUT WRITTEN APPROVAL FROM QAI.ANY LIABILITY ATTACHED THERETO IS LIMITED TO THE FEE CHARGED FOR THE INDIVIDUAL PROJECT FILE REFERENCED. THE RESULTS OF THIS REPORT PERTAIN ONLY TO THE SPECIFIC SAMPLE(S)EVALUATED. WWW.QAI.ORG info @qai.org