02-11-2019 Council Packet - Laserfiche WebLink

Home Browse Search

CMP Part 3B. General Land Use Plan City of Orono Community Management Plan 2020-2040 Part 3B, Page 16 of the surface area of the City. 2. Rural Preserve (1 unit per 5 acres) The northwest corner of the City is planned for a lower density of one unit per five acres. This area has been developed to provide large lot and quasi agricultural home sites. The extension of municipal water or sewer is not intended for these areas. Residential dwelling units will be provided as single family detached structures. 3. Rural Residential (1 unit per 2 acres) This is the typical rural residential density developed and planned to be permanently self-supporting. No rural density will be allowed greater than one unit per two acres except for those residences in existing rural housing clusters that were originally developed many decades ago and in most cases have been provided with municipal sewer within the past 3 decades. New rural developments may include housing clustering when environmental and site conditions allow, provided the overall density within the development conforms to these requirements, and provided that all sewage treatment needs can be adequately met within. Residential dwelling units will be provided as single family detached structures. 4. Urban Low Residential (0.5-2 units per acre) This is intended for areas that have developed in a land use pattern of lots developed many decades ago smaller than 1 acre, and have access to sanitary sewer services. These lots have a particular impact on lake water quality, and lake character and storm water management, massing, and hardcover controls are critical to the retention of this character. Residential dwelling units will be provided as single family detached structures. 5. Urban Medium Residential (3-10 units per acre) This higher density will be reserved for properties deemed by the City Council to be so uniquely situated that residential development at the prescribed density will not negatively impact surrounding land uses. Such properties must have municipal sewer and water available. Other factors that will be taken into consideration in determining the appropriate locations for this density will include proximity to and the need for other urban utilities and services in relation to the proposed use; transportation system impacts and site access; and the ability of the proposed use to meet City housing goals. Residential dwelling units will be provided as single and two family structures. 6. Urban Medium High/ Mixed Use Residential (10-20 units per acre) This land use designation is reserved for specific sites, which based on their proximity to services and transportation corridors are deemed appropriate for higher density projects. The Mixed Use Residential designation is intended for established commercial areas on higher classification transportation routes to introduce an element of higher density residential. This residential component will serve to augment the commercial uses with a near-by customer base and to provide an efficient use of land. The properties targeted for Mixed Use classification are in the Navarre area, including a number of commercially zoned properties abutting Shadywood Road, and additional commercial and residential properties abutting Shoreline Drive. This Mixed Use designation is intended to allow for the possibility of higher density multi-family residential development such as senior and assisted living, townhomes, condominiums or apartment buildings. Under the Mixed Use designation, properties currently zoned for residential use are not intended to be converted to commercial property, but existing commercial property could be converted to higher-density