2018-00234 - alarm system - Laserfiche WebLink

Home Browse Search

• s • Installation B210LPBP: Bulk pack of B210LP;package contains 10. FSP-851(A)plug-in detectors use a separate base to simplify B501(A):Standard European flangeless mounting base. installation, service, and maintenance. A special tool allows B501 BP: Bulk pack of B501;package contains 10. maintenance personnel to plug in and remove detectors with- out using a ladder. B200S(A): Intelligent, programmable sounder base capable Mount base(all base types)on an electrical backbox which is of producing sound output in high or low volume with ANSI at least 1.5" (3.81 cm) deep. For a chart of compatible junc- Temp aANSI Temporal 4, continuous tone, marching tion boxes,see DN-60054. tone,anndd custom tone. B200SR(A): Intelligent sounder base capable of producing NOTE: 1) Because of inherent supervision provided by the SLC sound output with ANSI Temporal 3 or continuous tone. loop, end-of-line resistors are not required. Wiring 'T-taps" or Replaces 8501 BH series bases in retrofit applications. branches are permitted for Style 4 (Class "B") wiring. 2) When using relay or sounder bases, consult the ISO-X(A) installation B224RB(A): Plug-in System Sensor relay base. Screw ter- sheet /56-1380 for device limitations between isolator modules minals:up to 14 AWG(2.0 mm2).Relay type: Form-C. Rating: and isolator bases. 2.0 A @ 30 VDC resistive;0.3 A @ 110 VDC inductive; 1.0 A @ 30 VDC inductive. Agency Listings and Approvals B224BI(A): Plug-in System Sensor isolator detector base. These listings and approvals apply to the modules specified Maximum 25 devices between isolator bases. in this document. In some cases,certain modules or applica- tions may not be listed by certain approval agencies,or listing ACCESSORIES may be in process. Consult factory for latest listing status. F110: Retrofit flange to convert B210LP(A) to match the • UL Listed:S1115. B710LP(A) profile, or to convert older high-profile bases to ULC Listed: S1115 (FSP-851A, FSP-851RA, FSP- low profile. • 851TA). F110BP: Bulk pack of F110; package contains 15. • MEA Listed:225-02-E. F210: Replacement flange for B210LP(A)base. • FM Approved. RA100Z(A): Remote LED annunciator. 3—32 VDC. Mounts • CSFM:7272-0028:0206. to a U.S. single-gang electrical box. For use with B501(A) • Maryland State Fire Marshal: Permit#2122. and B210LP(A)bases only. • BSMI:CI313066760036. SMB600:Surface mounting kit • CCCF:Certif.#2004081801000017(FSP-851T) M02-04-00:Test magnet. Certif.#2004081801000016(FSP-851). U.S. Coast Guard: 161.002/42/1 (NFS-640); 161.002/50/ M02-09-00:Test magnet with telescoping handle. • 0(NFS2-640/NFS-320/NFS-320C,excluding B210LP(A)). XR2B: Detector removal tool. Allows installation and/or • Lloyd's Register: 11/600013 (NFS2 640/NFS 320/NFS- removal of detector heads from bases in high ceiling applica- 320C,excluding B210LP(A)). tions. XP-4: Extension pole for XR2B. Comes in three 5-foot(1.524 Product Line Information m)sections. NOTE:"A"suffix indicates ULC Listed model. T55-127-010: Detector removal tool without pole. FSP-851: Low-profile intelligent photoelectric sensor. Must BCK-200B: Black detector covers for use with FSP-851(A) be mounted to one of the bases listed below. only; box of 10. FSP-851A:Same as FSP-851 but with ULC listing. WCK-200B: White detector covers for use with FSP-851(A) FSP-851T: Same as FSP-851 but includes a built-in 135°F only; box of 10. (57°C)fixed-temperature thermal device. FSP-851TA:Same as FSP-851T but with ULC listing. FSP-851 R: Low-profile intelligent photoelectric sensor, remote test capable. For use with DNRA/DNRW. FSP-851RA: Same as FSP-851R but with ULC listing. For use with DNRA. INTELLIGENT BASES NOTE:"A"suffix indicates ULC Listed model. NOTIFIER®is a registered trademark of Honeywell International Inc. NOTE:For details on intelligent bases,see DN-60054. ©2015 by Honeywell International Inc.All rights reserved.Unauthorized use of this document is strictly prohibited. B210LP(A): Standard U.S. flanged low-profile mounting base. 1S0 9001 This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. ENGINEERING&MANIHCTIRING All specifications are subject to change without notice. QUALITY SYSTEMS For more information,contact Notifier.Phone:(203)484-7161,FAX:(203)484-7118. www.notifier.com Page 2 of 2—DN-6935:E•2/11/2015