2018-00234 - alarm system - Laserfiche WebLink

Home Browse Search

on a half-chassis and one NFS2-3030 or NCA-2 mounted on a ABF-4B Annunciator Flush Box half-chassis. The right side houses a microphone/handset ABS-1TB(C)Annunciator Surface Box well.The CA-2 assembly includes CMIC-1 microphone.ADDR ABS-1B(C)Annunciator Surface Box Series doors with two-tier visibility are available for use with the CA-2 configuration: ADDR-B4, ADDR-C4, ADDR-D4 ABS-2B Annunciator Surface Box (below). ABS-2D(C)Annunciator Surface Box ADDR-B4:Two-tier-sized door designed for use with the CA-2 ABS-4D(C)Annunciator Surface Box chassis configuration.ADDR Series doors are similar to CAB- SEISKIT-CAB: Seismic mounting kit. Required for seismic- 4 Series "DR" doors, but a clear window space exposes the certified applications with NFS2-3030 and other equipment top two tiers of the CAB-4 enclosure.Use an SBB-B4 backbox mounted in CAB-4 Series Enclosures.Includes battery bracket with the ADDR-B4. See DN-7045, DN-6857. for two 26 AH batteries. ADDR-C4:Three-tier-sized door designed for use with the CA- SEISKIT LBB: Seismic kit for the NFS-LBB. Includes battery 2 chassis configuration. ADDR Series doors are similar to bracket for two 55 AH batteries. CAB-4 Series "DR"doors, but a clear window space exposes the top two tiers of the CAB-4 enclosure. Use an SBB-C4 OTHER OPTIONS backbox with the ADDR-C4. See DN-7045, DN-6857. 411:Slave digital alarm communicator. See DN-6619. ADDR-D4: Four-tier-sized door designed for use with the CA-2 411 UDAC: Digital alarm communicator. See DN-6746. chassis configuration.ADDR Series doors are similar to CAB- IPDACT-2, IPDACT Internet Monitoring Module: Connects 4 Series "DR" doors, but a clear window space exposes the to primary and secondary DACT telephone output ports for top two tiers of the CAB-4 enclosure. Use an SBB-D4 backbox internet communications over customer-provided Ethernet with the ADDR-D4. See DN-7045, DN-6857. connection. Requires compatible Teldat VisorALARM Central DPA-1: Dress panel, used with the CA-1 chassis when contig- Station Receiver.Can use DHCP or static IP. See DN-60408. ured with a DVC-EM, DVC-KD,and CMIC-1. See DN-7045. IPCHSKIT: IP Communicator Chassis Mounting Kit. For DPA-2: Dress Panel used with the CA-2 chassis assembly. mounting an IPDACT-2/2UD onto the panel chassis or CHS-4 DPA-1A4: Dress panel, used with the CA-1 chassis when the series chassis. Use IPENC for external mounting applications. CMIC-1 is not used. Provides mounting options on right two IPSPLT:Y-adapter option allow connection of both panel dialer bays for two ACS annunciators, or for blank plates. See DN- outputs to one IPDACT-2/2UD cable input. 7045. IPENC: External enclosure for IPDACT, includes IPBRKT ADP-4B: Annunciator dress plate. Mounts in rows 2, 3 or 4 of mounting bracket; Red;for black,order IPENC-B. a CAB-4 series enclosure. Used with ACS series annuncia- IPGSM-4G:Internet and Digital Cellular Fire Alarm Communica- tors. tor. Provides selectable configurable paths:cellular only, IP only, BMP-1: Blank module for unused module positions. or IP primary with cellular backup. Connects to the primary and DP-1B: Blank dress panel. Provides dead front panel for secondary ports of a DACT. For Canadian applications order unused tiers;covers DAA2/DAX series or AA-series amplifier. IPGSM-4GC. See DH 60769. Batteryplate, required. NOTE:For other options including compatibility with retrofit equip- BP2-4: q ment,refer to the panel's installation manual,the SLC manual,and CHS-4L: Low-profile four-position Chassis. Mounts two AA-30 the Device Compatibility Document. amplifiers. CHS-4N:Chassis for mounting up to four APS-6Rs. System Specifications CHS-6: Chassis used with the XP6 and XP10 Multi-Modules. SYSTEM CAPACITY Mounts up to six modules in any CAB-4 series row. • Intelligent Signaling Line Circuits 1 expandable to 10 NFS-LBB: Battery Box.The NFS-LBB is used to mount up to • Intelligent detectors 159 per loop two 55 AH batteries. Dimensions: Box: 24" (610 mm) wide x • Addressable monitor/control modules 159 per loop 14"(356 mm)high x 7.75" (197 mm)deep. Door:24.125"(613 mm)wide x 14.25" (362 mm)high;door adds 0.0625"(approx. • Programmable software zones over 2000 1.6 mm)to depth. • ACS annunciators BACKBOXES per CPU2-3030 32 address x 64 or 96 points NOTE:"C"suffix indicates ULC Listed model. NOTE: The CPU2-3030 can support up to 96 annunciator address points per ACM-24AT/-48A. BB-100: Backbox for batteries and power supplies. The BB- 100 is used to mount up to two 100 AH batteries and power SPECIFICATIONS supply,if needed.30" (76.20 cm)wide x 25" (63.50 cm)high x Primary Input Power: 7.5"(19.05 cm)deep;depth includes door. -AMPS-24: 110-120 VAC,50/60 Hz,4.5 A maximum. BB-200: Backbox for batteries and power supplies. Holds up -AMPS-24E:240 VAC,50/60 Hz,2.25 A maximum. to four 100 AH batteries (200 AH capacity) and power supply. 30" (76.20 cm) wide x 36" (91.44 cm) high x 7.5" (19.05 cm) DC Output: deep;depth includes door. -Main 24 VDC: Up to 5.0 A BB-UZC: Backbox for housing the UZC-256 for applications -Aux 24 VDC:Up to 5.0 A where the UZC will not fit in panel enclosure. Black; for red, -5 VDC:Up to 0.15 A. order BB-UZC-R. See DN-3404. Current draw(Standby/Alarm): ABF-1B(C)Annunciator Flush Box -CPU2-3030D board:0.340 A. ABF-1 DB(C)Annunciator Flush Box with Door.UUULC Listed. -CPU2-3030ND board:0.120 A. ABF-2B Annunciator Flush Box -LCM-320:0.130 A. ABF-2DB(C)Annunciator Flush Box with Door -LEM-320:0.100 A. DN-7070:P•3/8/17-Page 7 of 8