Laserfiche WebLink
. EARTHWORK QUALITY CONTROL INFORMATION <br /> • EXCAVATION BASE EVALUATION <br /> Judgments of supporting soils aze based on soils exposed, and on local samples of soils retrieved by hand augering and <br /> probing. Because conditions in the subsurface are ludden,it is not possible to fully characterize the subsurface conditions. <br /> Therefore,the client must accept that our judgments are limited to those soils which aze directly observable to us. <br /> As soil conditions may be variable at depth, it is best that excavation base observation be aided by deeper exploratory test <br /> borings(usually done prior to construction).Although these deeper borings may not tota.11y reveal what is in the subsurface, <br /> they greatly reduce the risk of deeper poor soils going undetected. <br /> The presence of�ound water within the excavation can also limit the supporting soil evaluation process.Also, if standing <br /> ground water is present, there is a risk to the client that compressible soils may not be observed and remain beneath the <br /> water during excavation.The compressible materials can become trapped beneath or witbin the subsequendy placed fill. <br /> FILLING <br /> Structural fill placement is commonly monitored by performing local compaction tests, which entails comparing a field <br /> density test to a laboratory Proctor test to arrive at a percent compaction. Density tests of fill only provide the compaction <br /> level of the fill at the location and elevation of the test. As many factors contol compaction, such as fill lift thiclmess, <br /> moisture content, material type and compactive effort, compaction variation within fill can exist which may not be <br /> represented by the tests.Density(compaction)tests are considered representative when used in a conscientious program of <br /> controlled fill placement,where the factors influencing compaction are closely monitored. Conclusions about fill suitability <br /> to support structural loadings from the results of a limited number of compaction tests includes increasa em nt�For this <br /> individual drawing the conclusions has complete knowledge of the aforementioned variables during p <br /> reason,part-time testing on a"will-call or trip"basis includes more risk to the client than"full-time"monitoring/testing. <br /> OVERSIZING <br /> Structural elements also exert loadings laterally; and because of this,the excavation and subsequent fill system needs to be <br /> oversized to accommodate these loadings. The extent of latenl oversizing is normally associated with the movement <br /> sensitivity of the structure and the strengtb/compressibility properties of the soils remaining along the excavation sidewalls. <br /> Oversizing on the order of 1 (horizontal):1 (vertical) is typically provided for foundations in "normal" conditions. <br /> However, oversizing on the order of 1'/z:l or more is usually needed in higlily compressible situations such as swamp <br /> deposits. <br /> AET does not practice in the field of surveying and must rely on location and elevation staldng of proposed construction by <br /> the client or their representative. Our measurements in the field are made in relation to those stakes or other location and <br /> elevation information provided to us.The reliability of AET's opinions, conclusions and recommendations based on those <br /> measurements is dependent on the accuracy of the staking or information provided by the client or their representative. <br /> FREEZING WEATHER <br /> Soils which are allowed to freeze will heave and lose density. Upon thawing,these soils will not regain their full original <br /> strength and density.The extent of heave and density/strength loss depends on the soil type and moisture condition; and is <br /> usually more pronounced in finer gained soils, and particularly silty soils. Foundations, slabs, and other improvements <br /> affected by such frost movements should be protected from frost intrusion during freezing weather. If filling takes place <br /> during freezing weather, all frozen soils, snow and ice should be stripped from all areas to be filled prior to new fill <br /> placement; and the new fill should not be allowed to freeze during or after placement. For this reason, it is usually more <br /> beneficial to perform excavate/refill operations during freezing weather in smaller plan areas where grade can be attained <br /> quickly rather than working larger areas where a large amount of frost stripping may be needed. <br /> STRUCTURAL SUPPORT ON UNCONTROLLED FILL <br /> Risks are associated with supporting structures on fill which has not been placed in a controlled and well documented <br /> manner.Even where existing fill appears to be well compacted(including when soil borings have been performed),hidden <br /> poorer or looser soils can potentially exist below or within the fill;or previous excavation and extension of the compacte� <br /> fill may not have been provided with sufficient oversize in all directions to accommodate the new lateral loadings.Risks <br /> can be reduced by means of increasing th�amount of testi�zg and observations. <br /> AMERICAN�NGINEERING TESTING,INC. <br /> 20-E.FLD013(2/O 1; <br />