Laserfiche WebLink
� <br /> SECTION 16160 <br /> ' PANELBOARDS <br /> , 1s00 GENERAL <br /> A. Panelboards shall be UL rated. Cabinets shall be constructed of galvanized steel. <br /> ' Covers shall be constructed of cold rolled steel finished with baked on enamel, <br /> ANSI 61 Grey. <br /> ' B. Panelboards shall be provided with hinged front trims and flush-type lock/handle <br /> assemblies. <br /> ' C. Panelboards shall be provided with copper or aluminum bussing and factory <br /> assembled lugs for connection of feeder conductors. <br /> ' D. Breakers shall be molded case, thermal-magnetic type with trip indication. Two <br /> and three pole breakers shall contain a common trip. <br /> ' E. All breakers shall be bolt-on type, with ampere ratings as shown on the Drawings <br /> or to match circuit sizes shown. <br /> ' F. The following manufacturers are approved for panelboards: Challenger, Cutler- <br /> Hammer, GE, Siemens-ITE and Square D. <br /> ' <br /> ' END OF SECTION <br /> , <br /> ' <br /> ' <br /> ' <br /> ' <br /> � <br /> , 022200 LGF 102 3/14/02 <br /> 16160 - 1 <br /> � <br />