2017-01543 - new structure - Laserfiche WebLink

Home Browse Search

, ESR-3159 I' Most�dely Accepted and Trusted Page 4 of 5 Polyurethane Foam Alliance (SPFA) for the spray the date of manufacture, the shelf life or expiration date, polyurethane foam insulation. the manufacturer's instructions for application, and the 5.8 Use of insulation in areas where the probability of evaluation report number(ESR-3997). termite infestation is "very heavy" must be in Intumescent coatings described in Sections 3.6 and 3.9 accordance with IBC Section 2603.8 or IRC Section are identified with the company name and address, the R318.4, as applicable. product name and use instructions. 5.9 The insulation components are produced in Belgrade, 8.0 OTHER CODES Montana, under a quality control program with In addition to the codes referenced in Section 1.0, the inspections by ICC Evaluation Service. products in this report were evaluated for compliance with 6.0 EVIDENCE SUBMITTED the requirements of the following codes: 6.7 Data in accordance with the ICC-ES Acceptance ■ 2006 Intemational8uilding Code�(2006 IBC) Criteria for Spray-applied Foam Plastic Insulation � 2006 Intemational Residential Code�(2006 IRC) (AC377), dated April 2016; including reports of tests in accordance with AC377 Appendix X. ■ 2006 Intemational Energy Conservation Code� (2006 6.2 Re orts of air ermeance testin IECC) p p g in accordance with ASTM E283. The products comply with the above-mentioned codes as 6.3 Reports of vapor permeance testing in accordance described in Sections 2.0 to 7.0 of this report, with the with ASTM E96. revisions noted below: 6.4 Reports of room corner fire testing in accordance with � Application with a Prescriptive Thermal Barrier: See NFPA286. Section 4.3.1, except the installation must be in accordance with Section R314.4 of the 2006 IRC. 6.5 Reports of potential heat testing in accordance with � Application with a Prescriptive Ignition Barrier: See NFPA 259. Section 4.4.1, except installation must be in accordance 6.6 Reports of fire propagation characteristics testing in with Sections R314.4.3 and R314.5.4 of the 2006 IRC. accordance with NFPA 285. ■ Application without a Prescriptive Ignition Barrier: 6.7 Report of critical radiant flux testing of exposed attic See Section 4.4.2, except attics must be vented in floor in accordance with ASTM E970. accordance with Section 1203.2 of the 2006 IBC or 7.0 IDENTIFICATION Section R806 of the 2006 IRC; and crawl space ventilation must be in accordance with Section 1203.3 of Components for JM Corbond MCST"' spray-applied foam the 2006 IBC or Section R408 of the 2006 IRC, as plastic insulation are identified with the manufacturer's applicable. name(Johns Manville)and address, the product name,the � �obsite Certification and Labeling: See Section 5.5, name of the inspection agency (QAI Laboratories, Inc.), except jobsite certification and labeling must comply mixing instructions, the flame-spread and smoke- �,yith Sections 303.1.1. and 303.1.2, as applicable, of the developed indices, the expiration date, and the evaluation 2006 IECC. report number(ESR-3159). International Fireproof Technology, Inc. /Paint to Protect • Protection Against Termites: See Section 5.8, except Inc. DC 315 coating is labeled with the manufacturer's use of the insulation in areas where the probability of name and address, the product name, the date of termite infestation is "very heavy" must be in manufacture, the shelf life or expiration date, the accordance with Section R320.5 of the 2006 IRC. manufacturer's instructions for application, and evaluation report number(ESR-3702). TPRZ Corporation Fireshell JM-TC coating is labeled with the manufacturer's name and address, the product name, TABLE 1-THERMAL RESISTANCE(R-VALUES)''2 THICKNESS(inches) R-VALUE(°F.ft=.h/Btu) 1.0 6.8 1.5 10 2.0 14 3.5 24 4.0 27 5.5 37 7.0 48 9.0 61 9.5 65 10.0 gg 12.0 g2 For SI: 1 inch=25.4 mm;1°F.ft.h/Btu=0.176°K.mZ/W. 'R-values are calculated based on test values at a 1-inch and 4-inch thicknesses. zR-values greater than 10 are rounded to the nearest whole number.