|
6123396212 BKPU & ASSOCIATES 545 P03 NOV 66 '01 13:01
<br /> 1347.0430�Subpart 10. ADAAC3 4.7.10: Dlagonal 1341.0432,Subpart 4. ADAAG 4.8.4: Landings,
<br /> CUFb ramps. If diaponal or comer type curb ramps have Ramps shall have(evel landings at�e bottom and top of
<br /> relumed cucbs or other well-definad edges, the edges each ramp and each ramp nan. ,
<br /> shall be paraliel to the direction of pedest�fan flow, 7he Landings shall have the#oilew�g fee,tures in items A to 0,
<br /> boKom of dfagonal a,rb ramps shall havs a minimum of 1341.0432, Subpart 4, Item A. ADqAG 4,8;4(�); .
<br /> 48 inches(1.220 mm)of dear space as shown ln Figures The landing shall be at least as wide as the ramp run
<br /> 15(c) and (d) In subpart 9. if diagonal cufi ramps are leading to it.
<br /> provided at marked crossings, the 48-inch (1,220-mm) �1341.0432, Subpart 4, Item B. ADAAG 4.8.4(2):
<br /> clear space sha{I be within the markings. See Figures The landing length shall be a mi�imum ot 60 inches
<br /> 15(c)and (d)in subpatt 9. If dlagonal curb ramps have (1,525 mm)clear. �
<br /> � flared sides, they shall also have at least a 24-inch 1341.0432, SubparE 4, Item C. ADAAG 4.8,4(3):
<br /> (610-mm)long segment of stratght curb located on each If ramps change direction at land'ngs, the minimum
<br /> slde of the curb ramp and within the marked crossing. landing size shall be BO inches(1,525 mm)by 60 inches
<br /> See Figure 15(c)In subpart 8. (1,525 mm).
<br /> �1341.0430, Subpart 11. ADAAG 4.7.11: Islands. 1341.0432, Subpart 4, item D. ADAAG 4.8.4(4):
<br /> My raised islands in crossings shall be cut through level If a doorway fs located at a landing,then the area in front
<br /> with the street or have curb ramps at both sldes and a � of the doorway shall comply with 4�#3,6 pa�t_13d1,0442
<br /> level area at least 46 indles(1,220 mm)long between the subpart 6.
<br /> curb ramps in the part af the Island intersected by t�e 1341.0432,Subpart�. ADAAG 4.8.5; (iandralls.
<br /> crossings.See Figures 15(a)and(b)in subpart 8. A ramp run that has a�ise greater than six inches (150
<br /> mm) or a horizontal projectlon greater than 72 inches
<br /> 1341.0432 ADAAC3 4.8; RAIVIPS. (1,830 mm)shafl have handrails on botl�sides. Handrails
<br /> 1341.0432, Subpart 1. ADAAG 4.$,1: Generai. . are not requ�red on curb�mps or adjacent to seating in
<br /> Any part of an accessible route with a slope qreater than assembly areas. Handrails shall comply with 4,�6�
<br /> 1:20 shall be wnsidered a rama and shall comply with A,� 1341.0468 and shall have the�features in items
<br /> th�S�� A to G.
<br /> 1341.0432,Subpart 2. ADAAG 4.8.2: Slope and 13�1.0432, Subpart S� Item A. ADAAG 4.8.5(1�;
<br /> rise. �The least possible slope_shall be used for any Handrails shall be providad along both sides of ramp
<br /> ramp.The maximum slope of a ramp in new consiruction segments. The inside handrail on switchback or dogleg
<br /> �j,. s,�lL��The maximum rise for any run sh011 be 30 ramps shall always be continuous.
<br /> inches(760 mm), See Figure 16. Curb ramps and ramps 1341.0432, Subpa�rt 5, Item B. ADAAG 4.8.5(2):
<br /> to be constructed eA-exitti��fn exisdng buildings If handrails are not continuous,they shall extend at least
<br /> or facilities may have slopes and rises as allowed ln 12 inches (3p5 mm) beyond the top and bottom of the
<br /> . 4,a,6�3�(a� pa�t 1431.0411, s�dbpart 3, Item A, if space ramp segment and shall be paraqel with the floor or
<br /> limitations prohiblt the use of a 1:12 slope or less. ground surface, 5ee Figure 17.
<br /> �.w�►sne�no
<br /> ¢ Swlaat ol Rnnp Le�tl L�nQlnp
<br /> A ���\����\a � �
<br /> \
<br /> WqMn1Y► 'elllen er Aun
<br /> ��um plsa
<br /> . Siope in mm fl m
<br /> 1:�2 a�1:10 90 7e0 90 8
<br /> 1:16 b�1;Zp 30 7B0 40 12 �
<br /> Flp.16
<br /> Compon nb of a Slnpk R�tap[tun s
<br /> �1341.0432, Subpart 3. ADAAG 4.8.3: Clear
<br /> width.7he minimum dear width of a ramp shall be 36
<br /> Inches(915 mm).
<br /> Chapter 1341,Mlnnesota Acces�lbility Code (ADAAO CompaHson Format) 1341-36
<br />
|