Laserfiche WebLink
� •1� �- • <br /> (��� BOSCH <br /> � <br /> Invented for life <br /> 5600 Series Mechanical Heat Detectors <br /> ► Post-activation i�dicator to easily identify units in <br /> alarm <br /> ► Multiple configurations satisfy a broad range of <br /> installations <br /> ► Broad range of back box mounting options <br /> ► Reversible mounting bracket for surface-mount or <br /> flush•mount installations <br /> � ,� k � 1 <br /> • <br /> �� r <br /> �y <br /> The System Sensor 5600 Series Mechanical Heat Detectors Certifications and Approvals <br /> provide low-cost property protection against fire and non- System Sensor holds these Listings and Approvals: <br /> life-safety installations where smoke detectors are <br /> inappropriate. <br /> Region Certification <br /> Warning For life-safety installations, smoke detectors USA UL UQGS:Heat-AutomaticFireDetectors <br /> must be used in lieu of or in addition to heat (UL521) <br /> detectors. <br /> FM <br /> CSFM 7270-1653:167 <br /> Functions NYC/MEA 199-03-E <br /> Detector Labeling <br /> The 5601P has a plain, unlabeled housing and is intended <br /> for residential applications. All other models have labeled Installation/Configuration Notes <br /> housings to ensure that the proper detector is being used. Compatibility Information <br /> Alphanumeric characters identify the activation method (FX The 5600 Series Mechanical Heat Detectors are compatible <br /> for fixed temperature or FX/ROR for combination fixed with all UL Listed Fire Alarm Control Panels (FACPs). <br /> temperature and rate-of-rise units) and the temperature Mounting Considerations <br /> rating in degrees Fahrenheit and degrees Celsius. <br /> Mount the detectors on ceilings using 3.5-inch or 4-inch <br /> Post-activation Fixed-temperature Indicator octagonal back boxes, single-gang boxes,or 4-inch square <br /> When the detector is activated,the collector drops from the back boxes with a square-to-round plaster ring. The <br /> unit.This allows easy identification of all units in alarm. mounting bracket is reversible for use in either surface- <br /> Note The fixed-temperature sensors cannot be reset mount or flush-mount installations. <br /> so they are not testable.The rate-of-rise Wiring Considerations <br /> sensors automatically reset and can be tested The terminal blocks accept wires from 14 AWG (1.8 mm)to <br /> if care is taken to avoid exceeding the fixed- 22 AWG (0.8 mm). <br /> temperature setting of the detector. <br /> www.boschsecurity.com <br />