Laserfiche WebLink
b Postformed Surfaces: PF-42(0.042-inch nommal thiclrness). <br /> c. Vertical Surfaces: GP-50(0.050-inch nominal thickness). <br /> d. Edges: PVC matching laminate in color,pattern,and fmish. <br /> 2.7 CABINET HARDWARE AND ACCESSORY MATERIALS <br /> A. General:Owner tp provide cabinet hardwaze and accessory materials associated with architectural <br /> cabinets,except for items specified in Division 8 Section"Finish Hardware." <br /> B. Cabinet Hardwaze selected by Owner. <br /> C. Hardware Standard: Comply with ANSUBHMA A156.9"American National Standard for Cabinet <br /> Hazdware"for items indicated by reference to BHMA numbers or referenced to this standard. <br /> D. Exposed Hardware Finishes: For exposed hazdware,provide finish that complies with ANSUBHMA <br /> A156.18 for BHMA code number indicated. <br /> 1. Dark Oxidized Satin Bronze,Oil Rubbed,on Bronze Base: BHMA 613 <br /> 2. Satin Chromium Plated,Brass or Bmnze Base: BHMA 626. <br /> 3. Satin Chromium Plated, Steel Base: BHMA 652. <br /> 4. Satin Stainless Steel, Stainless Steel Base: BHMA 630. <br /> E. For concealed hardware provide manufacturer's standard fmish that complies with product class <br /> requirements of ANSUBHMA A 156.9. <br /> 2.8 ARCAITECTURAL CABINET TOPS(COUNTERTOPS) <br /> A. Quality Standard: Comply with applicable WIC Section indicated below: <br /> 1. WIC Section 16-"Laminated Plastic Countertops, Splashes and Wall Paneling." <br /> B. Type of Top: Solid wood for transpazent finish(lumber boards, edged-glued where required to <br /> produce widths indicated)as follows: <br /> 1. Grade: Premium. <br /> C. Type of Top: Solid laminated for transparent fmish(nanow strips of lumber glued together)as <br /> follows: <br /> 1. Grade: Premium. <br /> D. Type of Top: High pressure decorative laminate complying with the following: <br /> L Grade: Premium. <br /> a. Colors,Patterns,and Finishes: Provide materials and products that result <br /> in colors and textures of exposed laminate surfaces complying with the <br /> following requirements: <br /> 2. Provide selections made by Architect from manufacturer's full range of standard colors and <br /> finishes in the following categories: <br /> ' a) Solid colors. <br /> b) Wood grains. <br /> c) Patterns. <br /> Page 5 of 10 <br />