Laserfiche WebLink
C. Colors,Textures,and Patterns: By Owner <br /> 2.3 TILE AND STONE PRODUCTS <br /> A. Unglazed Ceramic Mosaic Tile: Provide factory-mounted flat tile complying with the following <br /> requirements: <br /> 1. Composition: Natural clay. <br /> 2. Nominal Facial Dimensions: 2 inches by 2 inches. <br /> 3. Nominal Thickness: 1/4 inch. <br /> 4. Face: Plain with cushion edges. <br /> B. Glazed Wall Tile: Provide flat tile complying with the following requirements: <br /> l. Nominal Facial Dimensions: 4-1/4 inches by 4-1/4 inches(typical). <br /> 2. Nominal Facial Dimensions: 6 inches by 4-1/4 inches(at base only). <br /> 3. Nominal Thickness: 5/16 inch. <br /> 4. Face: Pattern of design indicated,with manufacturer's standard edge. <br /> 5. Face: As indicated. <br /> C. Trim Units: Provide tile trim units to match characteristics of adjoining flat tile and to comply <br /> with following requirements: <br /> 1. Size: As indicated,coordinated with sizes and coursing of adjoining flat tile where <br /> applicable. <br /> 2. Shapes: As follows, selected from manufacturer's standard shapes: <br /> a. Base for Thinset Mortar Installations: Straight. <br /> b. Wainscot Cap for Thinset Mortar Installations: Surface bullnose. <br /> c. External Corners for Thinset Installations: Surface bullnose. <br /> d. Internal Corners: Field-butted squaze comers,except use coved base and <br /> cap angle pieces designed to member with stretcher shapes. <br /> D. Stone Flooring: Provide flat stone.Owner shall choose material: <br /> 1. Nominal Facial Dimensions: 4-1/4 inches by 4-1/4 inches(typical). <br /> 2. Nominal Thickness: %2 inch. <br /> 3. Face: Pattern of design indicated,with manufacturer's standard edge. <br /> 4. Face: As indicated. <br /> E. Trim Units: Provide stone trim units to match chazacteristics of adjoining flat Stone and to <br /> comply with following requirements: <br /> 1. Size: As indicated,coordinated with sizes and coursing of adjoining flat Stone where <br /> applicable. <br /> 2. Shapes: As follows, selected from manufacturer's standard shapes: <br /> a. Base for Thinset Mortar Installations: Straight. <br /> b. Wainscot Cap for Thinset Mortar Installations: Surface bullnose. <br /> c. All corners for Thinset Installations as per Mfg instructions: <br /> 2.4 SETTING MATERIALS <br /> A. Latex-Portland Cement Mortar: ANSI A118.4,composition as follows: <br /> Page 3 of 6 <br />