Laserfiche WebLink
REScheck Softwar� `V�rsion 4.1.� <br /> Inspection Checklist <br /> Date: 08/21/07 <br /> Ceilings: <br /> �� Ceiling 1:Flat Ceiling or Scissor Truss,R-40.0 cavity insulation <br /> Comrrients: <br /> Above-Grade Walls: <br /> ❑ Wall 1:Insulated Concrete Forms,R-22.0 assembly R-value <br /> Corrxnents: <br /> [] Wall 2:Wood Frame,16"o.c.,R-19.0 cavity insulation <br /> Comments: <br /> Basement Walts: <br /> ❑ Basement Wall 1:Sdid Concrete or Masonry,9.0'ht/8.6'bg(9.0'insul,R-13.0 cavity insulation <br /> Comments: <br /> Windows: <br /> ❑ Window 1:Wood Frame:Double Pane with Low-E,U-factor:0.400 <br /> For windows without labeled U-factors,describe features: <br /> #Panes Frame Type Thermal Break? Yes No <br /> Comments: <br /> Doors: <br /> ❑ Door 1:Glass,U-factor.0.340 <br /> Comrrients: <br /> ❑ Door 2:Solid,U factor:0.350 <br /> Comments: <br /> Floors: <br /> '_1 Floor 1:All-Wood Joist/Truss:Over U�conditioned Space,R-38.0 cavity insulation <br /> Comments: <br /> Air Leakage: <br /> � Joints,penetrations,and all other such openings in the building envelope that are sources of air leakage are sealed. <br /> � Recessed lights are 1)Type IC rated,or 2)installed inside an appropriate air-tight assembly with a 0.5"clearance from <br /> combustible materials.If non-IC rated,fixtures are instatled with a 3"clearance from insulation. <br /> Vapor Retarder: <br /> i� Installed on the warm-in-winter side of aIl non-vented framed ceilings,walls,and floors. <br /> Materials Identification: <br /> � Materials and equipment are installed in accordance with the manufacturer's installation instructions. <br /> � Materials and equipment are identfied so that compliance can be determined. <br /> r� Manufacturer manuals for all installed heating and cooling equipment and service water heating equipment have been provided. <br /> � Insulation R-values and gfazing U-factors are clearly marked on the building plans or specifications. <br /> r] Insulation is installed according to manufacturer's instrucUons,in substantial contact with the surface being insulated,and in a <br /> manner that achieves the rated R-value without campressing the insulation. <br /> Duct Insulation: <br /> Orono-1348-07 Page 2 of 4 <br />